Author Topic: 360 specifications (Read 23347 times)

sonar2000 · « **on:** December 31, 2012, 10:51:18 AM »

Is the HB unit capable of recording the 360 scan. If so what program is available for review or are we stuck with unit playback?

Chuckl

ITGEEK · « **Reply #1 on:** December 31, 2012, 10:55:47 AM »

That's a great question Chuck.

rnvinc · « **Reply #2 on:** January 02, 2013, 04:42:38 PM »

Somebody get Martin on the phone....

Hey Martin..you up for another HB code-breaking challenge...

Rickie

sonar2000 · « **Reply #3 on:** January 02, 2013, 06:22:14 PM »

Maybe we should have sent him Christmas presents. I forgot what a bribe might bring us.....

....

.....

chuck

Bob B · « **Reply #4 on:** January 02, 2013, 08:07:01 PM »

I would be that you can record it. I would think the demo mode is playing a recording.....haven't seen anyone specifically say that though.

flo · « **Reply #5 on:** January 03, 2013, 12:54:25 AM »

Hi,

I suppose you can Record the 360 and they have added some additional data stream to the recording files, e.g. The angle of the transducer in order to align the Data recorded to the 360 screen.

The only program I currently know beging capable to show a 360 Screen is drdepth, but only together with its own DIY 360 solution (Polulu Maestro Controller), but perhaps Per can / is willing to adapt DrDepth to the humminbird 360 solution Recording files...

Opening a Humminbird 360 recording in any other viewer will most likely end up in looking on many continuously turns :-)

Florian

Rüdiger · « **Reply #6 on:** January 03, 2013, 04:18:53 AM »

Hi

It is incredible, that HB still has not own review software.

Should take example on LOWRANCE.

mvh
Rüdiger

sonar2000 · « **Reply #7 on:** January 03, 2013, 06:26:30 PM »

all of the sonars we use (6) have factory viewing programs other than a playback on the unit.. HB is the only one that doesn't. Chuck

Humminbird_Greg · « **Reply #8 on:** January 09, 2013, 02:09:26 PM »

No you cannot record the 360 Imaging sonar data.
Humminbird does not have a PC based sonar viewer.

ITGEEK · « **Reply #9 on:** January 09, 2013, 02:45:04 PM »

I'll bet that Rickard and xSilmarilSx can create/write one.

Humminbird_Greg · « **Reply #10 on:** January 10, 2013, 09:32:35 AM »

Hey guys, I was informed that you cannot record the 360 Imaging sonar data. I went back and edited my post above.

ITGEEK · « **Reply #11 on:** January 10, 2013, 09:35:13 AM »

Greg,
Is the reason being: There's just too much information
there, and it would quickly fill up an SD card?

xSilmarilSx · « **Reply #12 on:** January 10, 2013, 01:41:15 PM »

Even if you could record the 360 information, it would be pretty hard to display on a map. Like DrDepth can do.
Since the scanning is done in rotation and you move with the boat, all you would see on the map will be mostly a blur.

sonar2000 · « **Reply #13 on:** January 10, 2013, 05:51:36 PM »

Tell me again.
What is the purpose of the 360?
I can see where it would not fit into mapping but why would we not want to be able to record and play back or view?

On another thought...has any one got a 360 yet. Heard there was some issue with getting one..
I did notice that the HB site now has 4 mounting brackets for the 360.. Maybe we have to get one of them before the 360....
Chuck

Roddy · « **Reply #14 on:** January 11, 2013, 12:48:03 AM »

I have had a 360 mount on one of my boats for five months now and STILL no 360 unit!

Roddy

sonar2000 · « **Reply #15 on:** January 11, 2013, 08:43:05 AM »

Roddy maybe you did not get the right one (bracket). ......

Chuck

rnvinc · « **Reply #16 on:** January 11, 2013, 09:15:58 AM »

Quote from: Roddy on January 11, 2013, 12:48:03 AM

I have had a 360 mount on one of my boats for five months now and STILL no 360 unit!

Roddy

Pix, Roddy...pix ...we wanna see pix of the 360....uh...I mean...

Well...pix of the bracket would still be OK...

Rickie

Humminbird_Greg · « **Reply #17 on:** January 11, 2013, 11:32:01 AM »

Quote from: ITGEEK on January 10, 2013, 09:35:13 AM

Greg,
Is the reason being: There's just too much information
there, and it would quickly fill up an SD card?

I think (my opinion here) that the reason for this is that the 360 Imaging is data from an accessory (remember, this is not just another Si transducer cabled or switched to and from the unit) over the Ethernet connection. You can’t record shared sonar either and this is basically what the 360 Imaging is doing: sharing sonar data.

Humminbird_Greg · « **Reply #18 on:** January 11, 2013, 11:35:05 AM »

We have been shipping the 360 Imaging accessories for a few weeks now (not sure when we started). Roddy’s may or may not be on its way to the dealer he ordered it from.

kosmo · « **Reply #19 on:** January 12, 2013, 12:56:33 PM »

Quote from: sonar2000 on January 11, 2013, 08:43:05 AM

Roddy maybe you did not get the right one (bracket). ......

Chuck i made a bracket for my boat, but dont no the hole pattern

for the 360 so i havent drilled holes yet . so i guess that makes my bracket universal. still no 360 thow

sonar2000 · « **Reply #20 on:** January 12, 2013, 05:53:20 PM »

After looking at the HB brackets I dont see why a person cant make their own. Glad you did...
Chuck

kosmo · « **Reply #21 on:** January 12, 2013, 06:44:56 PM »

heres picture of the 360 bracket that i made. still not quite finished waiting on the final component

newkid4si · « **Reply #22 on:** January 12, 2013, 09:50:26 PM »

kosmo
NICE WORK! Welds are premium. Like the "lighting holes".
Not your first day on the job. lol

Tell me about the center piece on the table.

Mike

sonar2000 · « **Reply #23 on:** January 13, 2013, 08:51:13 AM »

Nice sturdy bracket. Hope the 360 gets to you soon.
Show us pictures when it is all installed.
Chuck

kosmo · « **Reply #24 on:** January 13, 2013, 09:21:12 AM »

Quote from: newkid4si on January 12, 2013, 09:50:26 PM

kosmo

Tell me about the center piece on the table.

Mike

thats a copper tree with some stainless wire rapped around it with some paper clips,washers and some little nuts on it. (i get creative some times)

Roddy · « **Reply #25 on:** January 15, 2013, 04:25:43 AM »

Kosmo,

Ah, The

R-Tez !

Roddy

kosmo · « **Reply #26 on:** January 19, 2013, 03:27:14 PM »

Quote from: sonar2000 on January 13, 2013, 08:51:13 AM

Nice sturdy bracket. Hope the 360 gets to you soon.
Show us pictures when it is all installed.
Chuck

its still not finished but ive got a good start. i did get enough done to go out on the water and try it out .seems to work alright just needs a little tweeking

sonar2000 · « **Reply #27 on:** January 19, 2013, 03:29:58 PM »

Interesting .... I was thinking this would be a bow mount. Never thought about the transom. By all means keep us updated.
Have we determined if the picture can be snapshot and if recording and reviewing is possible..

Chuck

skigill · « **Reply #28 on:** January 19, 2013, 07:36:55 PM »

Kosmo, Awesome! Beautiful boat by the way!

StrikeBack · « **Reply #29 on:** January 19, 2013, 08:23:42 PM »

Hey Kosmo, what tweaking do you need to do? What have you learnt about the install?

kosmo · « **Reply #30 on:** January 19, 2013, 08:32:23 PM »

Quote from: sonar2000 on January 19, 2013, 03:29:58 PM

Interesting .... I was thinking this would be a bow mount. Never thought about the transom. By all means keep us updated.
Have we determined if the picture can be snapshot and if recording and reviewing is possible..

Chuck

as far i can tell the unit wont record the 360 but does take snapshots. i see no reason why the 360 could not easily be mounted on the bow.it just needs to fold down for high speed.im going to modify my bracket later, so it will tilt forward. it wont go under my garage door as it is

StrikeBack · « **Reply #31 on:** January 19, 2013, 08:34:11 PM »

Kosmo, when I get mine I also want to tilt it. There is a tilt bracket on the HB site.

skigill · « **Reply #32 on:** January 19, 2013, 09:27:03 PM »

What we need is a quick detach mount too!

TroyBoy30 · « **Reply #33 on:** January 20, 2013, 07:57:46 AM »

http://forum.gon.com/attachment.php?attachmentid=673976&stc=1&d=1341082466

sonar2000 · « **Reply #34 on:** January 20, 2013, 03:55:59 PM »

Another quick question. Do you plan on using this while sitting still or at a slow troll speed..
Chuck

newkid4si · « **Reply #35 on:** January 20, 2013, 09:23:39 PM »

kosmo

Nice install. Curious if it would set back far enough for the 998 to get clear L/R beams.

Mike

kosmo · « **Reply #36 on:** January 21, 2013, 08:23:49 PM »

Quote from: newkid4si on January 20, 2013, 09:23:39 PM

kosmo

Nice install. Curious if it would set back far enough for the 998 to get clear L/R beams.

Mike

dgoldan · « **Reply #37 on:** September 23, 2014, 11:39:47 PM »

How did you make this animated gif?

Quote from: TroyBoy30 on January 20, 2013, 07:57:46 AM

http://forum.gon.com/attachment.php?attachmentid=673976&stc=1&d=1341082466

News:

Author Topic: 360 specifications (Read 23347 times)

Share me

Related Topics