Recent Posts

61

Other 3rd Party Software / Re: Helix and DrDepth

« Last post by abraquelebout on September 22, 2024, 01:29:06 PM »

hi Rüdiger , no it's not working and the câble is different, autochart work with anciant helix version

62

Other 3rd Party Software / Helix and DrDepth

« Last post by Rüdiger on September 22, 2024, 03:45:15 AM »

Hi

For live Sidescan Mosaic i used  DrDepth 3.9 on the laptop via Ethernet cable on my 898. Does this also work with Generation Helix?

mvh
Rüdiger

63

Helix Series Units / Re: Helix and DrDepth

« Last post by rnvinc on September 21, 2024, 06:39:08 PM »

You might also post this in the “Other 3rd party software” sub forum  ...

Some guys watch that forum exclusively  ...

http://forums.sideimagingsoft.com/index.php?board=17.0

Rickie

64

Helix Series Units / Re: Helix and DrDepth

« Last post by Rüdiger on September 21, 2024, 11:02:54 AM »

Hi

For live Sidescan Mosaic used  DrDepth 3.9 on the laptop via Ethernet cable on my 898. Does this also work with Generation Helix?

mvh
Rüdiger

65

Helix Series Units / Helix and DrDepth

« Last post by Rüdiger on September 21, 2024, 10:58:14 AM »

Hi

For live Sidescan Mosaic used  DrDepth 3.9 on the laptop via Ethernet cable on my 898. Does this also work with Generation Helix?

mvh
Rüdiger

66

Helix Series Units / Re: Low voltage issues

« Last post by JWN on September 19, 2024, 06:24:21 AM »

I have not but I will asap and see if that helps. Thanks

67

Helix Series Units / Re: Low voltage issues

« Last post by rnvinc on September 18, 2024, 07:55:43 PM »

Have you tried Restore Defaults ??

Rickie

68

Helix Series Units / Low voltage issues

« Last post by JWN on September 18, 2024, 05:11:06 PM »

So, I have a Helix 10 which is from when they first came out. Everything works great still except it continually shuts down due to low voltage. I traced the voltage from the battery through fuse box ect, and have high 12 to low 13's right up to the head unit. The power port male side has good voltage but when plugged into the head unit the head unit only read 10V or less usually, on a rare occurrence    I may see a 11v reading but rare. I have cleaned all connections and no change. Anyone have a solution to this issue?

69

Helix Series Units / Re: Color By Depth

« Last post by Kenai on September 14, 2024, 06:32:10 PM »

Sorry, I don't quite understand. In the track color section, only the color distance of the active track is set.
You write<< Color by Depth>>. Where exactly is this menu? I can't find it in my Menu 698c.
Wow, someone didn’t like creating their own maps using colored tracks and Autochart Live  function, it became scary.
Do you have a photo of what the color tracks ended up looking like in depth?

Something like this. It is an unfinished map. Color by depth are those green lines.
You can find more about that here:http://forums.sideimagingsoft.com/index.php?topic=6040.0

70

Helix Series Units / Re: Color By Depth

« Last post by rnvinc on September 12, 2024, 11:34:23 PM »

Here is info from the manual  ...





And the menus in the core unit  ...


I experimented in simulator but it’s not a valid representation because there is very little depth change in the simulator recording to see the effect of color changing in the Current track  ...

Rickie