New to the forums here. Glad to find this site and read up on info before making a purchase. Maybe get some help too!
Purchased a new Helix 5 SI two weeks ago. Since installation all worked well until 4 days ago when I inserted Navionics+ card. With the Navionics data card the chart goes from the info with buoys, depth and contours, to the default Hummingbird chart. After unit boots up, I go to Chart page (either full screen or split screen) says navigational loading. After some seconds, the chart displayed is using the Navionics data with boys and blue bottom color and sounding info. The problem is that the displayed chart flashes from the full and colored data display to a chart display that looks like the Helix default chart display. So every 2.75 seconds the chart switches to the default Helix chart for less than 1/8 second then back to the Navionics+ chart data. It goes on for 30 minutes at least like this. I restarted the Helix and the same thing repeated. I changed the chart preference from auto to chart chip only, same thing repeated. I selected to the Helix chart from the preferences, and chart data performed as expected with no sounding data and just shoreline info (but it did no do the flashing thing). I've tried restarting after each change, but it still flashes at 2.75 second intervals when using Navionics+ MSD card. Software for Helix 5 SI is version 7.520 which is the most current as per the FAQ's at Hummingbird.
I then tried it in a different new Helix 5 SI as suggested by Hummingbird tech support. Did the exact same thing right out of the box. After again speaking with Hummingbird in Eufaula (actually spoke on telephone with Willette) they again suggested I send back the "faulty" unit. I asked them if that meant both, 2 out of 2, units. They then said they might be able to try a Navionics+ card in their unit there. They looked but did not have a chart card to try. Said that the Navionics+ card WAS definitely comparable with the new Helix 5 SI. So probably a problem with the Navionics+ card. Willette was trying her best at a good effort.
I called Navionics and spoke with tech support rep Scott. Explained problem to him. He said the problem was probably the Helix 5 SI software since the card was being read and the chart was switching at a very consistent pattern. He said that downloading the few data updates would not solve the problem.
So my question for help is this.
Does anyone use the Navionics+ 16 GB micro SD card in their Helix 5 SI. If so, when you look at the GPS chart displayed to see the buoys marking, say zoomed to see a 4 mile channel, does your chart depth, buoy icons, and contours stay displayed as they should?
If you have any useful suggestions please feel free to toss your opinions in there. I really want this unit to work. Really! I am replacing a small Garmin fish finder and it worked fine, but I wanted to try the sonar improvements. I still have 2 weeks left for returns.
Thanks for your help!
Doug