Humminbird Side Imaging Forums

General => General Discussion => Topic started by: fishhook on April 18, 2017, 12:59:39 PM

Title: Can i network 998c to Helix 7 Chirp Gps G2N and Min Kota Ultrra.
Post by: fishhook on April 18, 2017, 12:59:39 PM
Can i network 998c to Helix 7 Chirp Gps G2N and Min Kota Ultrra. And what would i need.
Title: Re: Can i network 998c to Helix 7 Chirp Gps G2N and Min Kota Ultrra.
Post by: rnvinc on April 19, 2017, 06:40:25 PM
You will need the AS ETH 5PXG
http://www.humminbird.com/Products/AS-ETH-5PXG/ (http://www.humminbird.com/Products/AS-ETH-5PXG/)

You will need the AS EC QDE adapter cable for the HELIX  ... (998 doesn't need the adapter cable)  ...
http://www.humminbird.com/Products/AS-EC-QDE/ (http://www.humminbird.com/Products/AS-EC-QDE/)

And you will need an Ethernet cable from each unit to the AS ETH 5PXG  ... And an Ethernet cable from the Ulterra (if the Ulterra is iLink capable) to the AS ETH 5PXG  ...

The AS ETH 5PXG requires 12v power so plan it's installation  ...  and power it thru a switch so it doesn't drain your battery when not in use  ...

Rickie


Title: Re: Can i network 998c to Helix 7 Chirp Gps G2N and Min Kota Ultrra.
Post by: fishhook on April 20, 2017, 12:33:47 PM
thanks revinc, with the  AS ETH 5PXG could I add a heading course to ?
Title: Re: Can i network 998c to Helix 7 Chirp Gps G2N and Min Kota Ultrra.
Post by: rnvinc on April 20, 2017, 07:00:11 PM
thanks revinc, with the  AS ETH 5PXG could I add a heading course to ?

Ethernet is not necessary for the AS GPS HS antenna  ...

It will connect directly to 1 of the head units  ...and can then be shared thru Ethernet  ...

Rickie
SimplePortal 2.3.3 © 2008-2010, SimplePortal