Humminbird Side Imaging Forums

Other Humminbird Products => Lakemaster AutoChart => Topic started by: KOROVA on February 14, 2017, 09:26:11 PM

Title: PROBLEM TRANSFERING FINISHED MAP TO chartselect MAP CARD
Post by: KOROVA on February 14, 2017, 09:26:11 PM
PROBLEM TRANSFERING FINISHED MAP TO chartselect  MAP CARD
I HAVE AUTO CHART PRO AND I GET THRU ALL THE STEPS TO CREATING A MAP AND WHEN I DO THE FINAL STAGE OF CLICK ON LAKE MASTER UPDATE IT GOES THRU THE UPDATE  BUT BEFORE IT DOES THE FINAL TRANSFER A NOTE COME Up

ERROR: MAP PATH  N.A.
downloaded the Zero Lines Card europe and autochart pro data from ChartSelect
card is sandisk 32 gb
installed autochart on a 2. conputer - same error
unit is 798ci hd si combo
i created all folders from the manual
folder path is ok says humminbird support
files are ok says humminbird support
i tried two different readers witch i purchased separarly
i tried different usb ports
the card is not locked
it's sandisks micro extreme plus 32gb with sandisk adapter
i tried with and without adapter in the reader
Title: Re: PROBLEM TRANSFERING FINISHED MAP TO chartselect MAP CARD
Post by: Bob B on February 15, 2017, 03:30:32 PM
The map has to be written to a Zero Lines Card ... Not a chart select card......A zero lines card should have came with the software.

Maybe you just used the wrong terminology?
Title: Re: PROBLEM TRANSFERING FINISHED MAP TO chartselect MAP CARD
Post by: KOROVA on February 16, 2017, 01:36:58 PM
no, both is downloadable from chartselect - autochart and zerolines

https://chartselect.humminbird.com/store/autochart_pc?locale=en (https://chartselect.humminbird.com/store/autochart_pc?locale=en)
Title: Re: PROBLEM TRANSFERING FINISHED MAP TO chartselect MAP CARD
Post by: Bob B on February 16, 2017, 01:54:48 PM
This is something new to me ..... that you can create your own zero lines card with Chart Select.  It used to be a card that had to be purchased separately or it came with the purchase of Autochart PC software.

I hope you find your answers and please keep us informed if you find a solution.
SimplePortal 2.3.3 © 2008-2010, SimplePortal