Humminbird Side Imaging Forums

Side Imaging Forums => 797c SI => Topic started by: buck16on on February 25, 2018, 06:21:57 AM

Title: distance lines
Post by: buck16on on February 25, 2018, 06:21:57 AM

I have a 797c2 nvb. How do I put or select distance lines( range lines) to show up on my side imaging so I can tell how far away a structure or fish is from my transducer?

Title: Re: distance lines
Post by: rnvinc on February 25, 2018, 08:10:30 AM

SI range lines under the Sonar tab  ...

Rickie

Title: Re: distance lines
Post by: buck16on on February 26, 2018, 04:49:46 AM

Thank you. I had already figured it out by going to advance settings which I selected some where else. I think on newer models it is under the sonar menu, but on mine the advance selection is not.

Title: Re: distance lines
Post by: rnvinc on February 26, 2018, 11:22:36 PM

User Mode setting is under the Setup tab - and default is Normal  ...which hides several Menu items  ...

Rickie

Title: Re: distance lines
Post by: buck16on on February 27, 2018, 04:38:49 AM

Thank you for the information. It seems I can keep learning more and more about these hummingbird products. These units capabilities never cease to amaze me.