Humminbird Side Imaging Forums

General => General Discussion => Topic started by: bart1972 on September 02, 2016, 02:13:19 PM

Title: Customizing welcome tekst
Post by: bart1972 on September 02, 2016, 02:13:19 PM

Hi guys, i recently changed from my 987SI to a Helix10SI, could not resist the autochart feature.
With my old unit i had a custom welcome tekst when the unit was starting up.
I forgot how i did that, where some lines filled in the profile file if i,m not wrong.
But ho knows which lines to put in the tekst ?

are that the P lines ..or just one ?

Kind regards Bart



Profile:Ver.1.010
Ver.1.210;Dat.Mar 24 2016;Rev.4;Spd.800Mhz
SEDB;0x00000003
SEDU;0x000273c8
SEIB;0x000273c8
SEIU;0x00000003
SENB;0xffffffff
SENU;0x0000009f
SETB;0x0000009f
SLNG;0x00000002
SLNS;0x00000000
SMDL;0x000001f2
SIMT;0xffffffff
WVER;0x00000003
RVER;0x00000003
TVER;0x00000003
P1;
P2;
P3;
P4;

Title: Re: Customizing welcome tekst
Post by: rnvinc on September 02, 2016, 10:35:02 PM

http://forums.sideimagingsoft.com/index.php?action=downloads;sa=downfile&id=157 (http://forums.sideimagingsoft.com/index.php?action=downloads;sa=downfile&id=157)

Rickie

Title: Re: Customizing welcome tekst
Post by: bart1972 on September 03, 2016, 03:06:22 AM

Thanks a lot Ricky, that was very usefull.

Title: Re: Customizing welcome tekst
Post by: dutchguy on September 13, 2016, 09:27:47 AM

Also
The p1 t/m P4 are the custom text lines, tried it and the work.

Regards Bart

Title: Re: Customizing welcome tekst
Post by: rnvinc on September 14, 2016, 12:02:24 AM

Very good Bart ...

Rickie