Humminbird Side Imaging Forums

General => General Discussion => Topic started by: Buzzy McGraw on June 08, 2015, 08:24:05 AM

Title: 698 SI surface clutter
Post by: Buzzy McGraw on June 08, 2015, 08:24:05 AM

Moved
Having the same problem with my 698 SI. It didn't have a problem the first couple times out but is doing it now. Motor on/off trimmed up/dn doesn't matter. Different water didn't change. I noticed yesterday that it has 2 distinct lines on right side now. Unit is only 2 wks old. Transducer problem?

Title: Re: 698 SI surface clutter
Post by: Buzzy McGraw on June 08, 2015, 08:29:35 AM

Can't post any pics. Tried the same pic as previous post and says its too large?!

Title: Re: 698 SI surface clutter
Post by: rnvinc on June 10, 2015, 11:33:18 PM

Try using photobucket for posting pix ... 

And pix of your xducer install would be beneficial ...

Rickie

Title: Re: 698 SI surface clutter
Post by: Buzzy McGraw on June 12, 2015, 06:16:38 PM

http://i106http://i1065.photobucket.com/albums/u385/BuzzyMcGraw4/Mobile%20Uploads/image_zps5cutu3la.jpg5.photobucket.com/albums/u385/BuzzyMcGraw4/Mobile%20Uploads/image_zpsmxsgbnqq.jpg (http://i106http://i1065.photobucket.com/albums/u385/BuzzyMcGraw4/Mobile%20Uploads/image_zps5cutu3la.jpg5.photobucket.com/albums/u385/BuzzyMcGraw4/Mobile%20Uploads/image_zpsmxsgbnqq.jpg)

Title: Re: 698 SI surface clutter
Post by: Buzzy McGraw on June 12, 2015, 06:18:41 PM

(http://i1065.photobucket.com/albums/u385/BuzzyMcGraw4/Mobile%20Uploads/image_zps5cutu3la.jpg) (http://s1065.photobucket.com/user/BuzzyMcGraw4/media/Mobile%20Uploads/image_zps5cutu3la.jpg.html)

Title: Re: 698 SI surface clutter
Post by: Buzzy McGraw on June 12, 2015, 06:20:57 PM

Ahh. I figur(http://i1065.photobucket.com/albums/u385/BuzzyMcGraw4/Mobile%20Uploads/image_zps5cutu3la.jpg) (http://s1065.photobucket.com/user/BuzzyMcGraw4/media/Mobile%20Uploads/image_zps5cutu3la.jpg.html)ed out the pics! ;D

Title: Re: 698 SI surface clutter
Post by: Buzzy McGraw on June 12, 2015, 06:23:10 PM

(http://i1065.photobucket.com/albums/u385/BuzzyMcGraw4/Mobile%20Uploads/image_zpsmxsgbnqq.jpg) (http://s1065.photobucket.com/user/BuzzyMcGraw4/media/Mobile%20Uploads/image_zpsmxsgbnqq.jpg.html)

Title: Re: 698 SI surface clutter
Post by: rnvinc on June 12, 2015, 10:37:31 PM

It's picking up the Outboard mount and the toon on the other side ...

The SI beams reach all the way up to the water's surface left and right ...

You can verify this by removing the xducer and sticking it farther down in the water on a stick or pole of some sort ...

Pontoon installations benefit from dual SI xducer setups with the AS SILR Y cable ...

http://www.humminbird.com/Products/AS-SILR-Y/ (http://www.humminbird.com/Products/AS-SILR-Y/)

Rickie