Humminbird Side Imaging Forums

Software and Software Development => Other 3rd Party Software => HumViewer => Topic started by: joe p from mo on March 05, 2010, 03:40:52 PM

Title: Humviewer issue
Post by: joe p from mo on March 05, 2010, 03:40:52 PM

--------------------------------------------------------------------------------

Was able to get out for awhile and try the DI. I had a bunch of recordings that look great on the unit and when I did them, but in the humviewer there appeared to be a bunch of interference. I went back and took a pic off of my 997 and as you can see, it is much clearer. Any ideas??
(http://i972.photobucket.com/albums/ae203/JoePfrommo/rfprob.jpg)
(http://i972.photobucket.com/albums/ae203/JoePfrommo/S00030.png)

Title: Re: Humviewer issue
Post by: Rickard on March 05, 2010, 04:24:42 PM

Increase contrast and decrease brightness, or only decrease of brightness will remove some of the interference in the Humviewer image. If I have got this correct Humviewer use an "uncensored" raw recording with no noise filtering, while your unit probably does a lot of odd things with data before they are shown in the image.

Rickard

Title: Re: Humviewer issue
Post by: mrj9600 on March 05, 2010, 04:30:19 PM

Yep Rickard
You are correct about HumViewer showing the data unfiltered.
I would also recommend playing with the contrast and brightness.

/Martin

Title: Re: Humviewer issue
Post by: joe p from mo on March 05, 2010, 07:11:04 PM

Thanks for the response.  I have one more question.  In the past I did not have this issue with recordings and I am using the same set-up basically??? so I find it odd that I have interference now? 

Title: Re: Humviewer issue
Post by: joe p from mo on March 05, 2010, 07:17:43 PM

The brightness did the trick, thanks for the help.  ;D ;D