Humminbird Side Imaging Forums

Side Imaging Forums => 997c SI, 998c SI & 999ci HD SI => Topic started by: tomjohn on November 11, 2014, 09:27:29 PM

Title: 999 Problem
Post by: tomjohn on November 11, 2014, 09:27:29 PM

Seems I lost my DI and SI on my Humminbird 999. The screens come up but they are enpty. NEED HELP

Title: Re: 999 Problem
Post by: rnvinc on November 11, 2014, 10:17:58 PM

Check the "Transducer Select" menu under the Sonar tab to make sure "Hi Def SideScan" is selected ...(altho I would think even the SI and DI views would not show using a different selection)..

Also make sure the SI Range setting is set to a value that is more than the actual water depth ...

Rickie

Title: Re: 999 Problem
Post by: Humminbird_Greg on November 12, 2014, 04:17:27 PM

If that doesn't help; try cross-testing it with someone else's Humminbird Si model unit (any model will work for the test).

Title: Re: 999 Problem
Post by: Redge on November 14, 2014, 05:44:05 PM

I had the same thing happen last weekend kind of.  I hate to admit this, but after a while I realized I had somehow hit my switch to go to my thru hull ducer!!  Therefore you don't happen to have a switch to change between transducers do you?