Humminbird Side Imaging Forums

Other Humminbird Products => Accessories => Topic started by: tinman on August 13, 2013, 04:41:54 PM

Title: cannon digi troll
Post by: tinman on August 13, 2013, 04:41:54 PM
hi can anyone tell me
if i can use a humming bird fish finder  and digi troll 5S to bottom track.
why would digi troll 10s be any better?
Title: Re: cannon digi troll
Post by: Humminbird_Greg on August 20, 2013, 02:55:25 PM
You may have to contact Cannon to get this question answered. 800-227-6433
Title: Re: cannon digi troll
Post by: Trytoofish on August 20, 2013, 05:23:38 PM
this is what it says on page 23 of the manual, so yes you could.but you need cannonlink to do it.

Networking your Digi-Trolls
Up to six Digi-Troll series downriggers can be networked together with the CannonLink accessory. To network your
downriggers you will need the Relay Cable Accessory (019634) between each downrigger you would like to link.
The CannonLink cable will install to the Data In connector on the fi rst downrigger. Connect all other downriggers
by connecting the Relay Cable Accessory from the Data Out to the Data In of the next downrigger. A terminator is
needed on the last downrigger Data Out in order for the downriggers to properly communicate. This terminator is
included in the CannonLink accessory.


the complete digitrol 5 manual can be downloaded here

http://www.cannondownriggers.com/product_manuals/ (http://www.cannondownriggers.com/product_manuals/)
SimplePortal 2.3.3 © 2008-2010, SimplePortal