Humminbird Side Imaging Forums
Side Imaging Forums => 1197c SI, 1198c SI & 1199ci HD SI => Topic started by: JDGuess on May 27, 2013, 04:53:31 AM
-
I have lost my installation instructions and could not find this any where in the user manual. Could someone tell me which is in or + and which is - or common on the 1198? Thanks in advance.
JDGuess?
-
Welcome to the Side Imaging Forums JDGuess.
Are you asking about the wire color for the GPS Receiver ‘pigtail’ wires?
If so, which set do you have: Red, White and Black or Green, White and Black?
On both sets, the Black is NMEA Ground and White is the NMEA + or output but so is the Green wire connection (it uses a different prefix on the NMEA sentences though).
Give us some details on what you have and what you are trying to connect to.
-
Hey Greg, thanks for the reply. Yes I was asking about the gps pigtail. I'm connecting to a Simrad AP12 auto pilot. I used this same Pigtail with my Matrix and AP 12 and it worked perfect. I used the black and white wires. The green was not used.
I have had no luck with my 1198 connecting to AP. I guess I should try black and green?
Thanks, John Guess
-
The same White and Black connections should work John.
Make sure that you remembered to turn on the NMEA Output menu in the 1198 unit.
-
I had the output turned on. I' ll recheck my connections and try again. Thanks
-
BINGO! Got it Greg. Thanks, sure was missing AP taking me where I wanted to go. Humminbird to Simrad AP12- White to Red and Black to Blue.
Gone Fishing!