Humminbird Side Imaging Forums
Side Imaging Forums => 598c SI HD => Topic started by: duky- on February 12, 2013, 09:47:54 PM
-
First of all I would like to say hello and this is a very informative website! I have had my unit for about a month and I'm having good and bad days with my unit. I'm mostly struggling with my down imaging pictures. I know I'm going over some man made brush piles but I'm hardly lucky to get a image to kick out on DI. IM open to any suggestions. I'm staying around 2-4 mph and a chart speed of 3 or 4. I even have restored defaults a few times but can't seem to get a good DI. Let me know if you need anymore info. Thanks guys
(http://img.photobucket.com/albums/v652/dukY/S00013_zpsc4ddae33.png)
(http://img.photobucket.com/albums/v652/dukY/S00012_zps3f5d062c.png)
This image was basically at a stand still I was moving
(http://img.photobucket.com/albums/v652/dukY/S00009_zpsf4390cb5.png)
(http://img.photobucket.com/albums/v652/dukY/S00011_zps3f5d910b.png)
-
duky-
Don't panic. Your not alone. Of the 2D, DI and SI, I also struggle with the DI the most.
I have set at home watching recordings on Humviewer and while passing over a known target shown in
2D and SI, nothing or just a small part will show in DI.
I have had some very good DI screens, but everything has to be just right.
I think it has more to do with the correct angle, direction, speed etc. than the sensitivity adjustment.
The DI has 3 choices of display. Narrow,medium and wide. Mine is set to wide.
-
Thanks NEWKID! I will give it more time! That makes me feel a little better