Humminbird Side Imaging Forums

Side Imaging Forums => 997c SI, 998c SI & 999ci HD SI => Topic started by: Farrier20 on January 21, 2013, 09:32:54 PM

Title: Marking waypoints
Post by: Farrier20 on January 21, 2013, 09:32:54 PM

If I'm trolling with si and di on screen and locate brush pile 150 ft out can I move cursor to the brush pile and mark waypoint?

Title: Re: Marking waypoints
Post by: hvychev77 on January 22, 2013, 05:07:03 AM

yes you can, if you move your 4 way cursor any direction it will stop the chart. move your cursor over to the brush pile and click 'mark'......and it will then officially be marked. you can't get much sweeter than that.

Title: Re: Marking waypoints
Post by: rnvinc on January 22, 2013, 08:25:23 AM

When marking waypoints out to the sides on the SI view....

I have found my waypoints to be more accurate by marking the exact point on the image where the structure touches the bottom...

Rickie

Title: Re: Marking waypoints
Post by: kosmo on January 22, 2013, 09:58:31 AM

Quote from: rnvinc on January 22, 2013, 08:25:23 AM

When marking waypoints out to the sides on the SI view....

I have found my waypoints to be more accurate by marking the exact point on the image where the structure touches the bottom...

Rickie

  1+

Title: Re: Marking waypoints
Post by: sonar2000 on January 22, 2013, 11:23:56 AM

slant range correcxtion    beam angle correction.
From a previous post but may be interesting to you..click on this link internal to the forum
Chuck

http://forums.sideimagingsoft.com/index.php?topic=946.msg4876#msg4876 (http://forums.sideimagingsoft.com/index.php?topic=946.msg4876#msg4876)

Title: Re: Marking waypoints
Post by: Farrier20 on January 22, 2013, 06:09:36 PM

Thanks guys