Humminbird Side Imaging Forums
Side Imaging Forums => 898c SI => Topic started by: JWS1 on May 30, 2012, 03:14:07 PM
-
ok...my first post so here goes...i understand that my898c si transducer will not work will at high speed and that a second transducer needs to be installed , to go from si to 2nd transducer do you physicall have to unconnect si then connect 2nd transducer or does unit reconize both ...need some feedback
-
There is no need to connect/disconnect. You purchase a y cable and then install. the selection of the transducer is done thru a screen selection.
Chuck