Humminbird Side Imaging Forums

General => General Discussion => Topic started by: rdstair on April 24, 2012, 11:17:54 AM

Title: 6.180 on 998csi any problems
Post by: rdstair on April 24, 2012, 11:17:54 AM

I searched the forms to see if anyone reported problems with 6.180. Could not find any posts. Does any one know of problems with the 998?

Title: Re: 6.180 on 998csi any problems
Post by: sonar2000 on April 24, 2012, 02:44:50 PM

I think the upgrade works pretty well. Thou there may still be inter connect issues and possibly some waypoints..

Chuck

Title: Re: 6.180 on 998csi any problems
Post by: Double Digit on April 24, 2012, 03:16:38 PM

I have had it on my unit for awhile now I've been through all the menus checked everything out I can think of haven't found any problems at all,But and this could be a big BUT....this all has been done in my house my first trip on the boat will be in about a week then ill know for sure...

Title: Re: 6.180 on 998csi any problems
Post by: sonar2000 on April 24, 2012, 03:24:35 PM

OK, great.  As always let us know about the water trip..

Chuck

Title: Re: 6.180 on 998csi any problems
Post by: newkid4si on April 25, 2012, 01:08:15 AM

rdstair
   I have a 998 with 6.18 installed by HB at the repair service center.
   Just completed 5 hours of recording on the lake.  So far, so good.
   Previous software ( 5.410 ) worked fine for about a hundred hours then took a dump.
   DI flashing, SI image unreadable, plus others.
   6.18 seems to have corrected it. HB found no problems with unit or transducer.
   Fingers are still crossed.