Humminbird Side Imaging Forums
General => General Discussion => Topic started by: cfleague on April 22, 2012, 06:33:55 PM
-
When you set the "Arrival" option on a waypoint to 25 feet, how can you designate it to
specific waypoint and not all of them or is that not an option?
-
Right off hand I think you have to specify "navigate to" option and that will be a specific waypoint or route.
I will look thru the manual..
Chuck
-
What I want to do is use the alarm feature for a couple of shallow rocks that I have marked with way points. I want the alarm
to sound off when I get within 25 so I don't hit them.
-
Now you are asking a good question. I dont right off hand know how to set an alarm that will always be on for a particular target.
In the mean time I would put an icon on the rocks so you will see that you are approaching..
Chuck
-
What I want to do is use the alarm feature for a couple of shallow rocks that I have marked with way points. I want the alarm
to sound off when I get within 25 so I don't hit them.
The Arrival Alarm was designed to be used to notify you when you get within XX feet of a waypoint. If you want to use a waypoint to designate an obstruction than that is your right to do so however this will only work with one waypoint at a time and you will have to set the unit to “GOTO” or travel to that waypoint. I do not believe that it will work in the manner in which you want. What you are looking for would be a new feature.
-
CF, I check thru several of the HB manuals and dont see a way to associate a particular point with an alarm.
It seems the feature is to alert you to a select goto or navigate a route function and let you know when you are approaching a turn or progress point.
It is a different alarm than "drift" or off course settings.
I think it is a good idea and you might want to submit it via the wish list on this forum.
http://forums.sideimagingsoft.com/index.php?topic=323.0 (http://forums.sideimagingsoft.com/index.php?topic=323.0)
Chuck