Humminbird Side Imaging Forums
Side Imaging Forums => 798c SI => Topic started by: RickT on April 11, 2012, 11:24:06 PM
-
Ok so I bought a new 798ci and it was working fine, now I don't have under sonar the SI choice, WHat am i missing, thanks...
-
Click on views and bring up your SI screen and then click menu once or twice to bring up the menus.
-
Click on views and bring up your SI screen and then click menu once or twice to bring up the menus.
I did what you wrote but I still don't get the choice of 455 Mhz, on the SONAR menu, Now just so you know the boat it out of the water..
I get the choices of 83/200 Mhz...
I even reseted the unit to dafault, but nothing..
Any other ideas????
Thanks
-
Not sure what you are looking for. As far as Sonar 83 or 200 or 83/200 will be your only choices.
The 798 is only capable of 455 as far as SI/DI and there wouldn't be any other options. You would have to upgrade to a 800, 900 or 1100 series to get choices as far as SI/DI and then it would be 455 or 800.
-
This is what you should be seeing. The option to change SI/DI isn't there since the 798 isn't cabable of anything else other than 455.
-
If you are looking for something like this then you would need to upgrade to a 800 or higher unit to get different frequencies for SI/DI.