Humminbird Side Imaging Forums

Images, Snapshots and Videos => General Pictures and Screen Captures => Topic started by: cachristian on March 10, 2012, 11:55:16 AM

Title: Building
Post by: cachristian on March 10, 2012, 11:55:16 AM

First found wall ~250 long on river channel using 998.  Then building appeared.  Hbird is awesome.

Title: Re: Building
Post by: sonar2000 on March 10, 2012, 01:38:09 PM

good image.

What was the depth and and is the side range in meters?

Chuck

Title: Re: Building
Post by: cachristian on March 10, 2012, 03:09:05 PM

36 ft deep.  side range are in feet.

Title: Re: Building
Post by: sonar2000 on March 10, 2012, 04:37:28 PM

Great picture and thanks for the depth/feet info.

Have you tried setting contour mode on and eliminate the water column? 

http://forums.sideimagingsoft.com/index.php?topic=2089.0 (http://forums.sideimagingsoft.com/index.php?topic=2089.0)

Interesting picture with this setting..

Chuck

Title: Re: Building
Post by: cachristian on March 10, 2012, 08:28:11 PM

I'm going to give contour mode a try.  I'm also going back to record & open in Humviewer.

Title: Re: Building
Post by: newkid4si on March 10, 2012, 10:57:20 PM

Nice clear images. Notice you are running the SI at 1 1/2 times the depth. ( 36 D x 50 SI ). Normally run mine at 3 to 4 times depending what I'm looking for.
Will have to rerun some targets again with the SI dialed in. Thanks for the idea. Just remembered that may work in Humviewer under the " crop to " option.