Humminbird Side Imaging Forums

Side Imaging Forums => 798c SI => Topic started by: MichBill on January 26, 2012, 04:03:16 PM

Title: Replacement transducer and mount for 798 ci si
Post by: MichBill on January 26, 2012, 04:03:16 PM

Can anyone steer me to where I can purchase a replacement transducer and mount for my 798 CI SI?

I just cannot find it on the Humminbird site and have sent sustomer service a request for heop, but I have not heard from them.

Thanks

Title: Re: Replacement transducer and mount for 798 ci si
Post by: tshirts on January 26, 2012, 07:39:07 PM

Mount - a bit confusing - HB site says both are compatable???
$10 here: http://store.humminbird.com/products/323034/MC_W (http://store.humminbird.com/products/323034/MC_W)
$35 here:  http://store.humminbird.com/products/411813/MS_700E (http://store.humminbird.com/products/411813/MS_700E)

Transducer - http://store.humminbird.com/products/314029/XHS_9_HDSI_180_T (http://store.humminbird.com/products/314029/XHS_9_HDSI_180_T)

You will need another power cable - http://store.humminbird.com/products/323028/PC_11 (http://store.humminbird.com/products/323028/PC_11)

Title: Re: Replacement transducer and mount for 798 ci si
Post by: LocDown on January 26, 2012, 08:11:10 PM

the $10 one is a cover for the connectors, not the mount itself.

Title: Re: Replacement transducer and mount for 798 ci si
Post by: MichBill on January 27, 2012, 11:29:07 AM

Thanks guys.

Title: Re: Replacement transducer and mount for 798 ci si
Post by: Humminbird_Greg on February 01, 2012, 12:33:49 PM

MichBill,
Have you already ordered these parts?
I hope not… sorry but I have been tied up with my normal job duties and have not had the time to help out here.

If you have a 798ci Si unit then you need this unit mount:
MS-M Unit mount for non-Ethernet version 700 series units
http://store.humminbird.com/products/323118/MS_M (http://store.humminbird.com/products/323118/MS_M)

If you have the newer Ethernet capable 798ci HD Si unit then you need this unit mount: MS-700E Unit mount for the Ethernet capable 700 series units
http://store.humminbird.com/products/411813/MS_700E (http://store.humminbird.com/products/411813/MS_700E)

The standard Compact Side Imaging (CSi) transducer:
XNT-9-Si-180-T
http://store.humminbird.com/products/313993/XNT_9_SI_180_T (http://store.humminbird.com/products/313993/XNT_9_SI_180_T)

Optional HDSi version Side Imaging transducer that some 798 owners are using :
XHS-9-HDSi-180-T
http://store.humminbird.com/products/314029/XHS_9_HDSI_180_T (http://store.humminbird.com/products/314029/XHS_9_HDSI_180_T)

Title: Re: Replacement transducer and mount for 798 ci si
Post by: dirrick siler on July 31, 2013, 08:51:44 AM

I've been with humminbird for two wars and a couple peace keeping mission but i cant believe that HB has made a bracket for their/ our tranducers know that the break and my hard earned money is on the bottom of the lake ..at$269 a whop that much do anyone have any solution to the problem and where and what i can get to secure the trnducer to the boat..not drill no hole in the bottom of the boat..not drilling into the jack plate metal...and if i come up with something ...we all can get the info fo free...