Humminbird Side Imaging Forums

General => General Discussion => Topic started by: Rocketman783 on October 18, 2011, 12:47:28 PM

Title: Interlink
Post by: Rocketman783 on October 18, 2011, 12:47:28 PM

How can I determine which unit is connected to which port on my interlink? Wiring is buried and hard to get at.

Title: Re: Interlink
Post by: ITGEEK on October 18, 2011, 01:26:55 PM

Maybe the system status screen on each unit
might have some info.
I don't use interlink so I'm not sure.

Title: Re: Interlink
Post by: Humminbird_Greg on October 18, 2011, 04:37:47 PM

Try this:
Step 1: unplug the cable going to the Port 1 connector on the InterLink.
Step 2: power both units on and go to the System Status screen to see what accessories each unit is showing as connected.  The unit that shows the InterLink as connected would be the one still plugged into the Port 2 connection on the InterLink.  The unit not showing the InterLink as connected would be the one connected to the Port 1 connection on the InterLink.

Title: Re: Interlink
Post by: Rocketman783 on October 18, 2011, 04:42:36 PM

Thanks will try that.