Humminbird Side Imaging Forums

Side Imaging Forums => 1197c SI, 1198c SI & 1199ci HD SI => Topic started by: goodwinexplorer on August 05, 2011, 04:32:01 AM

Title: dr depth via 1197
Post by: goodwinexplorer on August 05, 2011, 04:32:01 AM

1197 has any one connected this unit to a pc and run dr depth in real time?
what leads? where can i get them
bob

Title: Re: dr depth via 1197
Post by: RGecy on August 05, 2011, 02:38:19 PM

I created a new post that answers your question here: http://forums.sideimagingsoft.com/index.php?topic=2896.msg16497#msg16497 (http://forums.sideimagingsoft.com/index.php?topic=2896.msg16497#msg16497)

Title: Re: dr depth via 1197
Post by: Rüdiger on August 06, 2011, 04:01:44 AM

Yesterday i tested the ethernetfunction together with DrDepth.
Absolutely magnificent !!
I think this live-sidescan-mosaik funtion is a „revolution“ for wreckhunters. Now it is possible to effectively scan the search area without white spots.

mvh
Rüdiger

Title: Re: dr depth via 1197
Post by: goodwinexplorer on August 07, 2011, 09:41:58 AM

thanks  for the info i will order a cable tomorrow, there area few ethernet cables availabel which one?
bob

Title: Re: dr depth via 1197
Post by: Rüdiger on August 07, 2011, 01:11:35 PM

orange-white = 1
orange = 2
green-white = 3
green = 6

That's the inkcoverage of my cable, but i do not know as all HB-ethernetcable are equal.

mvh
Rüdiger

Title: Re: dr depth via 1197
Post by: Mark1000 on August 07, 2011, 11:14:33 PM

Thanks Rudiger, are there any other tips you can give us to help get ethernet connection working to Dr. Depth.   I followed the Dr. Depth instructions - spliced a RJ45 connector onto humminbird ethernet cable AS EC 10E.  Checked it for continuity with an ohm meter to make sure cable was ok.   Changed the settings in Dr. Depth to look for HB ethernet.  Windows firewall turned off.    Dr Depth either gives me an error message (says something like not able to establish Humminbird ethernet connection) or else just sits there waiting for gps position which never comes.  Did you check "no NMEA" in Dr. Depth NMEA/COM settings?  Did you have the HB NMEA output turned off (I tried it both ways)?   Did you have to change any LAN setting on your laptop?   Any information will probably help the rest of us.     

Title: Re: dr depth via 1197
Post by: Rüdiger on August 08, 2011, 03:32:07 AM

Hey Mark

In the networksettings turn the local network on,in the firewallsetting you must allow DrDepth the networkconnection, then follow the DrDept helpinstruction in all points and it must work.
I use -no NMEA-

good luck

Rüdger

-- I use Windows XP --