Humminbird Side Imaging Forums

Side Imaging Forums => 797c SI => Topic started by: mirb on October 31, 2010, 09:52:19 PM

Title: depth information in firmware v. 3.940 recorded file
Post by: mirb on October 31, 2010, 09:52:19 PM

Is there a way to get depth reading information from recorded file from firmware version 3.940 to use in drdepth?

Title: Re: depth information in firmware v. 3.940 recorded file
Post by: RGecy on October 31, 2010, 10:04:42 PM

I forget which update added the depth field to the SON format, but it was not recorded and calculated on playback. 

If the depth is not recorded in the file, the only way would be to play it back and record the NMEA output. 

Robert

Title: Re: depth information in firmware v. 3.940 recorded file
Post by: mirb on November 01, 2010, 01:57:04 PM

I connected the unit to the PC, but NMEA output show water temp and depth info only, and not GPS position, playing back file recorded with new and old firmware (connecting through hyperterminal and drdepth). how can i get both depth and gps?

Title: Re: depth information in firmware v. 3.940 recorded file
Post by: RGecy on November 01, 2010, 03:13:27 PM

What are you using to see the NMEA data on the computer?  It should have GPS string.

Robert

Title: Re: depth information in firmware v. 3.940 recorded file
Post by: mirb on November 01, 2010, 04:10:43 PM

i use the "pig tail method": a serial port with the pin 5 -> black/GND, pin 2 -> white/NMEA output.
Here a log example from hyperterminal playing back a recorded file:

$INGLL,,,,,,V*16
$INVTG,,T,,M,,N,,K*5E
$INMTW,18.5,C*18
$INDPT,,*47
$INRMC,,V,,,,,,,,,*21
$INDPT,,*47
$INGGA,,,,,,0,,,,,,,,*76
$INZDA,,,,,,*58
$INMTW,18.4,C*19
$INDPT,,*47
$INRMC,,V,,,,,,,,,*21
$INDPT,,*47
$INGLL,,,,,,V*16
$INVTG,,T,,M,,N,,K*5E
$INMTW,18.5,C*18
$INDPT,,*47
$INRMC,,V,,,,,,,,,*21
$INDPT,,*47
$INGGA,,,,,,0,,,,,,,,*76
$INZDA,,,,,,*58
$INMTW,18.6,C*1B
$INDPT,,*47
$INRMC,,V,,,,,,,,,*21

Title: Re: depth information in firmware v. 3.940 recorded file
Post by: RGecy on November 01, 2010, 04:20:25 PM

Does the GPS data show up on the HB unit when you play back?

Is it possible no GPS reciever was connected?

Robert

Title: Re: depth information in firmware v. 3.940 recorded file
Post by: mirb on November 01, 2010, 04:28:59 PM

yes ,gps data show up on the unit and the GPS receiver is connected

Title: Re: depth information in firmware v. 3.940 recorded file
Post by: mirb on November 02, 2010, 05:12:02 AM

Now works: I have to be outdoor and get a gps fix to output NMEA data even in a playback; now i can get depth reading from old recorded file with firmware 3.940.

Title: Re: depth information in firmware v. 3.940 recorded file
Post by: Humminbird_Greg on November 02, 2010, 03:47:41 PM

mirb,
Have you tried to play a sonar recording in the forced Simulator mode?
Power the unit on without the GPS Receiver or transducer connected.  When the screen shows the Humminbird 797c Si title page, press the MENU button and than select “Simulator”.  Let the unit time out and you should be in the forced Simulator mode.  Check for a NMEA output after you have started viewing the Sonar Recording.