Humminbird Side Imaging Forums
General => General Discussion => Topic started by: Goingbig on June 16, 2010, 01:07:08 PM
-
Finally pulled the trigger on a 998c si and it should arrive any day! Also picked up the Fish n chip card. I am so excited. I am making a big jump in the electronics world from my old black and white combo. Any out of the boxs tricks I should be aware of? Also Ive debated on mounting locations for the transom transducer and I am wondering if the location of my old one would work.
(http://i30.photobucket.com/albums/c340/goingbig/transome.jpg)
Bottom Right.
Also think I am going to add a second transducer. I am just blabbing now, it feels like chrismas.
Thanks guys for all the things ive read, and will continue to read.
-
Welcome to the forum.
You are most likely going to need a second transdcuer. If you were able to mount it low enough down near the bottom of the V you may be able to get away with it and not cause any turbulence on the props.
Robert
-
Yeah thats what I figured. So if I ordered a 2nd ducer, and the y cable would that be all I needed provided the wire length was long enough? And in that situation would I put one where the current (old) ducer is, and then one on its opposite side?
-
Y cable length was enough to fit my 28' Bayliner, so you shouldn't have an issue there.