Humminbird Side Imaging Forums

Software and Software Development => Other 3rd Party Software => HumViewer => Topic started by: pascalfromfrance on June 08, 2010, 11:06:01 AM

Title: HUMVIEWER version 60 failure...
Post by: pascalfromfrance on June 08, 2010, 11:06:01 AM

hi everybody, :)

since i 've downloaded yesterday the release 60, nothing works.
everything was ok with the previous release.

i did not change anything in my folders. yesterday my last 3 records could be scanned and today it's not the case.
every time i try to , humviewer gives this following message :

" This is not a valid humminbird Sonar recording file.

Could not find any .SON FILES FOR R00009."

HELP please because no explanation of this failure.

ps : i tried with many other recording files ...

PC : windows XP
my unit : 797 c2 SI

VERSION : 4.77

thanks in advance.
p@sc@l

Title: Re: HUMVIEWER version 60 failure...
Post by: pascalfromfrance on June 10, 2010, 11:46:27 AM

Hello everybody,

Is there anyone to help me  ,please ? ::)

Thanks a lot.

Title: Re: HUMVIEWER version 60 failure...
Post by: sonar2000 on June 10, 2010, 12:00:56 PM

Send TIMO a note.  ......timo.leppaaho@aina.net

Chuck

Title: Re: HUMVIEWER version 60 failure...
Post by: pascalfromfrance on June 10, 2010, 12:08:29 PM

Hi Chuck,

thanks for your reply . ;)

but who is Timo ? 

Title: Re: HUMVIEWER version 60 failure...
Post by: sonar2000 on June 10, 2010, 02:57:21 PM

sorry, I got my fingers tangled up.  Humviewer is written by Martin and his link is: mrj9600.  He is on the forum staff. 
Also the current release of HV is 67.  Have you tried that? 

FYI:  Timo writes the humfinder software.     

chuck

Title: Re: HUMVIEWER version 60 failure...
Post by: pascalfromfrance on June 11, 2010, 08:44:41 AM

Hi,

i was wrong because i mentioned my current release was 60 but mine is really 67 ! sorry.

and the probleme still goes on.... :'(

p@sc@l

Title: Re: HUMVIEWER version 60 failure...
Post by: sonar2000 on June 11, 2010, 04:11:07 PM

ok, got that  rel 67. 
here is a link on the forum to make sure the data gets copied over from the unit sd to the pc.  see if this helps.

http://forums.sideimagingsoft.com/index.php?topic=937.0 (http://forums.sideimagingsoft.com/index.php?topic=937.0)

Chuck

Title: Re: HUMVIEWER version 60 failure...
Post by: pascalfromfrance on June 16, 2010, 04:05:34 AM

hi,

since..... yesterday , it works again ! ;)



in this release, impossible for me to get a view with SI BROWN color as the previous release, i've tried many choices but nothing appears in my favourite colour.... :-\

anyway, thanks for help :)

Title: Re: HUMVIEWER version 60 failure...
Post by: sonar2000 on June 16, 2010, 08:03:48 AM

It works for us.  I ytried both the SI and the DI.  Are you right clicking on the SI or DI screen.  You should get a tab asking for several selections.  Select the color scheme and then SI Brown.
Chuck

Title: Re: HUMVIEWER version 60 failure...
Post by: pascalfromfrance on June 16, 2010, 08:20:42 AM

hello Chuck,

  i've got no choice  between SI and DI ,as before.

Some of tabs (with many selections )has strictly dissapeared.
and only few of them  can propose me several choices. many choices "vanished" on the screen.
very strange 'cause nothin' was changed on my computer except the release !!!

 i will try again later.

have a nice day

Title: Re: HUMVIEWER version 60 failure...
Post by: sonar2000 on June 16, 2010, 03:16:50 PM

Golly,  you might try deleting HV67 and reinstalling.   Chuck   ......::)