Humminbird Side Imaging Forums
General => General Discussion => Topic started by: Swann on August 02, 2022, 10:19:25 AM
-
Hello Every1,
So as of late, i'm the proud owner of an 1198cX_SI with an LED screen.
i also own a 598ciHD_SI and have 3 Transducers ; an XHD9 HDSI 180T, a Compact XNT9 180SI T and a 2D XNT9 20T for Higher Speed via A SI DB Y-Splitter Cable.
Now i know the 598 Does Not have Ethernet in order to exchange Waypoints and such via GPS interaction with the 1198 as 1 would w/a 798 BUT if i were 2place the 1198 at the Helm with the XHS9 HDSI 180T and XNT9 20T mounted at the Transom and then connected via Y-Splitter to the 1198 - Would i be able 2 put the 598 at the Bow and connect 2the 1198 for Sonar Readings ONLY?
Is THAT a possibility and IF True - How Would i Do That?
Thanks, Sandro
-
With the 598 not having an Ethernet connection there is no current way for the 598 to get data from any xducers connected to the 1198 ...
Now a caveat ... HB used to make a switch (US2 W switch) that allowed connecting 2 head units to one xducer ... but even that only allowed one head unit at a time to use that xducer ...
Amazon shows it ... but I doubt they actually have. It was discontinued many years ago ...
https://www.amazon.com/Humminbird-US2-Fish-finder-Switch/dp/B000G62EM0 (https://www.amazon.com/Humminbird-US2-Fish-finder-Switch/dp/B000G62EM0)
I don’t have one in my collection ...
Rickie
-
... and there we have it folks, more invaluable info once again from the 1 and Only Mr.RNVINC right here at SideImagingSoft Forums... Pls stay tuned next week 4more exciting & hard found Tips & Tricks 4Ur Humminbird Unit of almost Any Era BUT 1st, a word from our Sponsor(s)... LoL ! Thank U Mr.Rickie.