Humminbird Side Imaging Forums

Side Imaging Forums => 898c SI => Topic started by: 97Aero on January 16, 2014, 11:01:35 PM

Title: 899 NMEA 2000 Tank Level Sensor
Post by: 97Aero on January 16, 2014, 11:01:35 PM
Just purchased a EP-65R tank level cable for my NMEA backbone. The 899 recognizes that its on the network although I do not have any reading on any instrument I configure for a tank. Not sure where to go here. I kinda just figured it would work. My tank is reading about half with a measured resistance of 178 ohms which should be close. The cable is hooked up correctly with no other devices on the tank outputs.

Any ideas anyone?
Thanks

SimplePortal 2.3.3 © 2008-2010, SimplePortal