Humminbird Side Imaging Forums

General => General Discussion => Topic started by: 1fisherofmen on December 14, 2016, 09:44:31 PM

Title: 360 Imaging
Post by: 1fisherofmen on December 14, 2016, 09:44:31 PM

I have a 998c SI combo W/ GPS. I recently picked up a 360 imaging unit. This 360 comes with a GPS receiver/heading sensor as did the 998. Do I really need both GPS receivers mounted in my boat?

Title: Re: 360 Imaging
Post by: Bob B on December 14, 2016, 11:16:14 PM

If you only have the 1 unit ..... just use the HS GPS.

Title: Re: 360 Imaging
Post by: 1fisherofmen on January 03, 2017, 07:50:04 PM

thanks Bob, and sorry for the late response! I'll be hooking things up some time this spring. Thanks again. I have another concern, my 998 has only 1 Ethernet port and I have a terrova connected to it. I've seen hummingbird has an e-switch but I don't know about these things. Will I be able to see both the terrova and the 360 on my control head through this switch?

Title: Re: 360 Imaging
Post by: Bob B on January 03, 2017, 07:59:28 PM

Yes all devices can talk to each other with the switch......You connect the Ethernet cable from all your devices to it....If you have more devices than 1 switch can handle .... you can add more.

http://www.humminbird.com/Products/AS-ETH-5PXG/ (http://www.humminbird.com/Products/AS-ETH-5PXG/)

Title: Re: 360 Imaging
Post by: 1fisherofmen on January 07, 2017, 08:36:11 PM

Awesome, Thank you.