Author Topic: Update 5.32 Down Imaging Issue  (Read 5621 times)

0 Members and 1 Guest are viewing this topic.

Offline jgollihar

  • Jr. Member
  • **
  • Joined: Jun 2010
  • Location: Abilene,Texas
  • Posts: 21
  • Unit(s): 1197, 998
  • Accessories: interlink
Update 5.32 Down Imaging Issue
« on: March 05, 2011, 03:53:39 PM »
Installed 5.32 update. Everything seems to work except down imaging. All it will do is flash. Has anyone else who has installed the update had this issue?


Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Re: Update 5.32 Down Imaging Issue
« Reply #1 on: March 05, 2011, 06:57:52 PM »
I would reinstall the previous software and see if its fixed, then do the new update again.

Make sure you power on the unit (before you insert the sd card), restore the defaults, then insert the sd card with the update on it and follow the steps.  When it powers down and comes back on, restore the defaults again.

Robert
Humminbird Guru and Forum Administrator

Offline sonar2000

  • Chief
  • Global Moderator
  • *
  • Joined: May 2009
  • Location: Kerr Lake NC
  • Posts: 5970
  • It is not lost ...it has been misplaced.
  • Unit(s): (1) 1197 (1) 1198
  • Software: 6.6
  • Accessories: Tow Fish
Re: Update 5.32 Down Imaging Issue
« Reply #2 on: March 05, 2011, 07:02:49 PM »
Which unit do you have?

Be sure to follow Robert's advice..

Chuck
« Last Edit: March 05, 2011, 07:03:56 PM by sonar2000 »

Offline jgollihar

  • Jr. Member
  • **
  • Joined: Jun 2010
  • Location: Abilene,Texas
  • Posts: 21
  • Unit(s): 1197, 998
  • Accessories: interlink
Re: Update 5.32 Down Imaging Issue
« Reply #3 on: March 06, 2011, 03:05:28 PM »
Robert, I had already tried that, and the problem continues. I have discovered that the problem only occurs if the sensitivity setting is set on AUTO. If I put the sensitivity setting for the down and side scan on anything other than AUTO, the unit will work just fine.
ANY SUGGESTIONS?
My unit is a 2010.. 1197

Offline sss_floripa

  • Jr. Member
  • **
  • Joined: May 2010
  • Location: Florianópolis - Brazil
  • Posts: 37
  • Unit(s): HELIX 10 CHIRP MEGA SI+ GPS G3N
  • Software: 2.110
  • Accessories: AutoChart Pro 2.300
Re: Update 5.32 Down Imaging Issue
« Reply #4 on: March 08, 2011, 06:37:36 AM »
I reported this defect in February 11, 2011, 06:27:17 AM
Also reported to Humminbird suport that responded did not identify this defect.
I am awaiting a solution.... :( :(

After upgrading my 1197cx SI (manufactured in 2010/09/10) to the new 5.320 version of the screen freezes down imaging.

Defect occurs in MODE SIMULATOR
Down Sensitivity AUTO
Screen 100% Down Imaging

I checked the error only occurs with Down Sensitivity AUTOMATIC.

Returned to previous version (4.950) and it works perfectly Down Imaging.

Offline RGecy

  • Administrator
  • *
  • Joined: Mar 2009
  • Location: Beaufort, SC
  • Posts: 1981
    • SideImagingSoft.com
  • Unit(s): 1197c SI, 997c SI & 785c2
  • Software: 4.950 & 4.510
  • Accessories: Interlink & GRHA
Re: Update 5.32 Down Imaging Issue
« Reply #5 on: March 09, 2011, 01:51:37 AM »
No, not sure what else to do.  Try calling HB and see what they have to say. 

Robert
Humminbird Guru and Forum Administrator

Offline sss_floripa

  • Jr. Member
  • **
  • Joined: May 2010
  • Location: Florianópolis - Brazil
  • Posts: 37
  • Unit(s): HELIX 10 CHIRP MEGA SI+ GPS G3N
  • Software: 2.110
  • Accessories: AutoChart Pro 2.300
Re: Update 5.32 Down Imaging Issue
« Reply #6 on: March 09, 2011, 10:02:38 AM »
----- Original Message -----
From: service@humminbird.com
To:
Sent: Wednesday, February 16, 2011 5:11 PM
Subject: RE: Contact Us


Dear Sir,

Thank you for contacting Humminbird. We appreciate your interest in our products.
We have not encountered any problems at this time.
We have given your information to our engineering dept to see if we can duplicate the problems that you noted.
At this time we suggest to use the 4.95 software.


If we can assist you further on this subject or any other Humminbird related questions please feel free email us again or contact our Customer Resource Center at 1-800-633-1468 to speak with a Customer Service Representative. Our hours are Monday thru Friday 8:00 a.m. to 4:30 p.m. and Wednesday 8:30 a.m. to 4:30 p.m.

Good Boating and Fishing!
Willette

Offline MonteSS

  • Jr. Member
  • **
  • Joined: Jan 2011
  • Location: Central Virginia
  • Posts: 57
Re: Update 5.32 Down Imaging Issue
« Reply #7 on: March 09, 2011, 01:04:29 PM »
I would use manual settings for now.

....Bill

Offline Humminbird_Greg

  • Humminbird Helper
  • Humminbird Staff
  • *
  • Joined: Mar 2009
  • Location: Eufaula, AL.
  • Posts: 6546
  • I help because I can
    • Humminbird Web Site
Re: Update 5.32 Down Imaging Issue
« Reply #8 on: March 11, 2011, 08:37:06 AM »
Like MonteSS suggested: use manual settings for now until the Engineers can figure out what is going on and come out with a fix for this through another software release.

Greg Walters at Humminbird
gwalters@johnsonoutdoors.com


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo

 

Related Topics

  Subject / Started by Replies Last post
3 Replies
5156 Views
Last post November 20, 2009, 09:37:27 PM
by harry padgett
16 Replies
9719 Views
Last post March 07, 2011, 06:22:00 AM
by stillbear
18 Replies
11511 Views
Last post February 07, 2012, 03:48:48 PM
by nicknight
5 Replies
6979 Views
Last post April 15, 2014, 05:25:41 AM
by Skot
2 Replies
3129 Views
Last post July 08, 2014, 01:05:24 PM
by Bobbylove
7 Replies
4785 Views
Last post March 09, 2015, 12:00:19 PM
by navionic
3 Replies
1795 Views
Last post April 15, 2020, 10:05:22 PM
by rnvinc
1 Replies
570 Views
Last post September 27, 2023, 09:50:33 PM
by rnvinc


SimplePortal 2.3.3 © 2008-2010, SimplePortal