Humminbird Side Imaging Forums
Side Imaging Forums => 1197c SI, 1198c SI & 1199ci HD SI => Topic started by: iowamuskies on August 17, 2013, 02:36:01 PM
-
I have a 1197 unit on the bow attached to a 101 terrova with ipilot. After two years of working fine, I now have erratic depth and temperature readings whenever I step on the throttle to turn the prop on the trolling motor. When I release the throttle, the depth readings go back to normal however the temp reading never recovers unless I turn the unit off and back on again. Issue still exists if the other 1197SI I have on the console is turned off.
Any advice on how to most easily solve this issue? Do I replace my 101?
-
Has anything changed with your software version? What v are you running?
-
Nothing has changed on the software version. I have not updated since new as I am a bit worried about getting into the update process and it not working and being unable to back my way out (I am on a Mac...).
-
Here is some info of possibilities...
http://www.bbcboards.net/humminbird-sonar-gps/172968-all-sonar-information-resource.html#post1538564 (http://www.bbcboards.net/humminbird-sonar-gps/172968-all-sonar-information-resource.html#post1538564)
RF can come from many different sources...
It's a process of elimination to track it down...
Be patient...what works for some may not work for others...
HB can also help...1-800-633-1468
Rickie
-
+1
Call the Humminbird Customer Resource folks: 1-800-633-1468