Humminbird Side Imaging Forums
General => Articles and Tutorials => Topic started by: SgtPalm1 on July 13, 2015, 06:08:54 PM
-
I have been on just about every forum to find a way to mount the 360 where I could remove it easily if needed. There is a wealth of knowledge out here so I thought I would add my solution to the bow mount 360. I took an old evinrude trolling motor mount, rebuilt it. It was the smallest flip down locking mount I could find and it had a sleeve that was 1.5" so a sheet of cork cut to size worked well to take up the gap.
(http://i1109.photobucket.com/albums/h421/wilg1/20150712_144311_zpsrm8ye3fi.jpg)
(http://i1109.photobucket.com/albums/h421/wilg1/20150712_144233_zpsjodrckzl.jpg)
Thanks for all the posts. I also found the fix for the 360 not being recognized by the onix. Older 360 will not update on new onix with 2.30.