Humminbird Side Imaging Forums

Side Imaging Forums => 898c SI => Topic started by: SVT on August 28, 2012, 10:12:32 PM

Title: Linking my 858 and 898 together...Questions...
Post by: SVT on August 28, 2012, 10:12:32 PM
I have the 898 and 858.. Do I need to run both GPS pucks? I had the 898 first than added the 858. I want to be able to mark way points on one and have it come up on both.... Do I have to put the 858s transducer on also? I thought I could get away with running only the SI transducer and than just connecting the two with the Ethernet cable... But its not working... What more do I need to do too get these bad boys too work together?? thanks everyone..
Title: Re: Linking my 858 and 898 together...Questions...
Post by: wolfs4evr on August 29, 2012, 03:05:10 AM
You can only share sonar with like units.  IE:  998/898/798, etc.  Your 858 can get 2d sonar from the 898s transducer but that will be it.  No DI since DI units are different from SI/DI units.

You can go with one GPS puck.  Just set the one that doesn't have the puck connected via the Ethernet settings to the one with the puck connected.
Title: Re: Linking my 858 and 898 together...Questions...
Post by: SVT on August 29, 2012, 07:25:34 AM
Im just not sure how too set it up in the settings. Im a newbie too humminbird units...
Title: Re: Linking my 858 and 898 together...Questions...
Post by: Humminbird_Greg on August 29, 2012, 10:49:56 AM
I would start by checking the software version each unit is running.  Humminbird recommends running the latest version of software in your units.  For the 858c and 898c Si units this would be version 6.420

If you are only going to use the sonar on one unit, there is no need to use two GPS Receivers other than to have one as a back-up in case the first one fails.

Download the Ethernet manual that is posted on this web site: http://forums.sideimagingsoft.com/index.php?action=downloads;cat=24 (http://forums.sideimagingsoft.com/index.php?action=downloads;cat=24)
It should help you with connections and how to set your units up.

Title: Re: Linking my 858 and 898 together...Questions...
Post by: SVT on August 29, 2012, 07:21:41 PM
Just bought a SD card on ebay. Im going to update it and see if that helps... thanks guys for all your help..
Title: Re: Linking my 858 and 898 together...Questions...
Post by: lango73 on August 30, 2012, 12:53:03 AM
Check to make sure the connection between the two units is valid and that they are in fact linked. Check out page 10 of the ethernet networking manual and make sure the network menu shows.
Title: Re: Linking my 858 and 898 together...Questions...
Post by: SVT on August 30, 2012, 07:19:15 AM
Where do i get the network manual...
Title: Re: Linking my 858 and 898 together...Questions...
Post by: SVT on August 30, 2012, 07:26:40 AM
Will the updates be the same for the 858 and the 898?
Title: Re: Linking my 858 and 898 together...Questions...
Post by: ITGEEK on August 30, 2012, 07:55:27 AM
The version numbers of the updates may be the same, but they are
different machines.
You will most likely need a separate download for
each.
Title: Re: Linking my 858 and 898 together...Questions...
Post by: Humminbird_Greg on August 30, 2012, 09:33:35 AM
Where do i get the network manual...


He meant the Ethernet manual.
Look in my post above:
http://forums.sideimagingsoft.com/index.php?action=downloads;cat=24 (http://forums.sideimagingsoft.com/index.php?action=downloads;cat=24)
Title: Re: Linking my 858 and 898 together...Questions...
Post by: Humminbird_Greg on August 30, 2012, 09:34:27 AM
The version numbers of the updates may be the same, but they are
different machines.
You will most likely need a separate download for
each.

ITG is correct: the version number may be the same but the actual update files for each model unit are different.
Title: Re: Linking my 858 and 898 together...Questions...
Post by: SVT on August 30, 2012, 09:59:58 AM
Wow you guys are great. This is a real learning curve for me im a young guy and love these units once i get them dialed in... I really appreciate all the help, cant thanks you guys enough...
Title: Re: Linking my 858 and 898 together...Questions...
Post by: sonar2000 on August 30, 2012, 03:55:56 PM
Which is why HB needs to get a handle on their naming conventions. The current 48 charc names mean nothing to us in the field..
1197_6.180 is more reliable information and can be meaningful.
239a987cd740839fg83k749dfki48204mn8uh7d6.bin on the other hand defies any ability here to know what level of release for what machine..

Chuck
SimplePortal 2.3.3 © 2008-2010, SimplePortal