Humminbird Side Imaging Forums
Other Humminbird Products => Other Humminbird Fish Finders => Topic started by: jepik on October 27, 2016, 11:56:35 PM
-
it will lose depth in the numbers of feet but will show rts window readings all the time..example.. reading will show 3 ft but the rts window will show correctly at 7.5 ft...when at idle both will read correctly..thanks
-
Maybe settings are all jacked up?
Try resetting defaults - also if using 200/83KHz - try 200 KHz and turning sens. down a bit.
-
thanks sfw 1960..I will give a try and restore defaults..
-
Also SwitchFire clear if in under 20FOW may help....
Let us know~
-
sfw1960..tried restoring defaults..switchfire to clear..under 20 ft. set at 200khz..did not get it.. although I think it help a little..seems not to lose the reading as much as it did..both still work at idle..rts window is a little more diffcult to see now.. :'(
-
Well if you registered it for Humminbird Select within the 1st yr., you can probably have them check or fix....