Humminbird Side Imaging Forums
Other Humminbird Products => Accessories => Topic started by: navionic on April 25, 2017, 06:49:08 AM
-
Please Help!
This transducer has a frequency of 800 kHz ?
Support can not give a clear answer. Pin contacts like a XNT 9 SI 180 T
-
Hi Navionic
Look here if the yellow label is correct http://www.humminbird.com/Products/XHS-9-HDSI-180-T/ (http://www.humminbird.com/Products/XHS-9-HDSI-180-T/)
mvh
Rüdiger
-
The "U" in XHS 9 HDSI 180 T U is irrelevant ...
Rudiger gives the correct link for the XHS 9 HDSI 180 T ...
And it does utilize 455kHz/800kHz SI and 200kHz/83kHz 2d and temperature ...
Rickie
-
Thanks , Rudiger and Rickie
Please post photo pin contacts your transduser XHS 9 HDSI 180 T
-
Thanks , Rudiger and Rickie
Please post photo pin contacts your transduser XHS 9 HDSI 180 T
(http://i477.photobucket.com/albums/rr134/rnvinc/HB/null_zpsb4bd5280.jpg) (http://s477.photobucket.com/user/rnvinc/media/HB/null_zpsb4bd5280.jpg.html)
Rickie
-
I'm aware of this scheme. Searching for real photos
-
I'm aware of this scheme. Searching for real photos
It's the same pin layout (as depicted in the diagram I posted above) for all core series SI xducers... and any core series cable compatible with the SI units ...
(http://i477.photobucket.com/albums/rr134/rnvinc/HB/640095F9-E124-4865-9A5B-8FA588B1286D_zpsxy0wwfnc.png) (http://s477.photobucket.com/user/rnvinc/media/HB/640095F9-E124-4865-9A5B-8FA588B1286D_zpsxy0wwfnc.png.html)
Rickie
-
Thanks.
This XNT 9 SI 180 T or XHS 9 HDSI 180 T?
-
Thanks.
This XNT 9 SI 180 T or XHS 9 HDSI 180 T?
The pic is XHS 9 HDSI 180 T ...
All HB SI xducers (except ONIX and ION) have identical pinouts...
The wire channels are the same for XNT 9 SI 180 T and XHS 9 HDSI 180 T ...
Only the sounder SI transmitter is different in each head unit (and the rectangular bar piezoes are longer in the XHS 9 HDSI 180 T) ...
-----
It is even possible to transmit 800kHz thru the XNT 9 SI 180 T ... It just won't give very good results at 800kHz ...
Rickie