Humminbird Side Imaging Forums
Side Imaging Forums => 1197c SI, 1198c SI & 1199ci HD SI => Topic started by: goodwinexplorer on April 22, 2012, 08:59:27 AM
-
i am fitting 2 through hull transducers as i have a deep keel ,i have tested them with a as side y-splitter cable 720055-1 the cable is labeled side and dual beam and it only seems to work with the plug labled side, plug in, is this the correct cable? or do i need to switch some thing on in the unit?
i notice the cable you mention is as-si-db-y cable.
Any help please
-
If you are connecting two Side Imaging transducers together you need the AS-Si-LR-Y cable (720056-1).
-
AS SILR Y
Transducers
720056-1
.
Side Imaging Splitter Cable
Y Cable - Separates Side Imaging into Left and Right Beams - for Side Imaging products only. Allows the use of two side imaging transducers with one unit without the need for a transducer switch. Used in applications where the a plastic thru the hull transducer is required on a boat with a deep V hull. Can also be used if the motor or other items on the exterior of the boat may block one side of the transducer and distort readings.
Check on line for pricing..
Chuck
-
thanks, they sold me the wrong cable
-
"they" may not have understood the connection you wanted. If new "they" should swap..
Chuck