Humminbird Side Imaging Forums
Side Imaging Forums => 997c SI, 998c SI & 999ci HD SI => Topic started by: chuckauten on March 17, 2013, 07:41:27 AM
-
Gregg, we have a get together in Benton, KY for a group of us to learn more about SI. With the size of the group, it will be hard for everyone to see the screens and learn. I have a projector screen that attaches to my laptop which projects the screen image on the wall. I see that the PC2 cable will attach between the compter and 998.
My question is, will the images on the 998 be duplicated on the laptop screen?
-
chuckauten,
I am sure Gregg will chime in tomorrow when he is back in the office. The PC connect cable is just used to sync with Humminbird PC. It does not display anything.
What you need to do is use the Video out feature of the 998c and patch it in to the Projector Screen. Or if you laptop has has Video in, you could connect it there. You will need the VC-1
http://store.humminbird.com/products/322955/VC_1 (http://store.humminbird.com/products/322955/VC_1)
Glad to hear you have a good group. Please let us know if there is anything else we can help with.
Good Luck,
Robert
-
Benton KY, I will be there doing some crappie fishing the first week in April, we will be trying out a new 587 ci hd di fish finder. I have been practicing using mine the past couple weekends attached is a pic of 3 skids put together in a trinagle I think. the thing is i don't really know how to set up the di finder yet. i see a lot of clutter in my images, Still learning how to clear them up it can be so confusing.
-
chuckauten,
I am sure Gregg will chime in tomorrow when he is back in the office. The PC connect cable is just used to sync with Humminbird PC. It does not display anything.
What you need to do is use the Video out feature of the 998c and patch it in to the Projector Screen. Or if you laptop has has Video in, you could connect it there. You will need the VC-1
[url]http://store.humminbird.com/products/322955/VC_1[/url] ([url]http://store.humminbird.com/products/322955/VC_1[/url])
Glad to hear you have a good group. Please let us know if there is anything else we can help with.
Good Luck,
Robert
"CHIME"
Robert is 100% correct.
-
Benton KY, I will be there doing some crappie fishing the first week in April, we will be trying out a new 587 ci hd di fish finder. I have been practicing using mine the past couple weekends attached is a pic of 3 skids put together in a trinagle I think. the thing is i don't really know how to set up the di finder yet. i see a lot of clutter in my images, Still learning how to clear them up it can be so confusing.
bKY,
Start another post and add some Screen Snapshots of what you are seeing for the clutter. We can then make some menu setting suggestions. Also see if you can tell if it appears only when the boat is moving or if it shows when stationary too. Rough water conditions of just after a rain can cause a lot of surface clutter too.
-
Thanks guys. If any of you want to come, the get together will be on March 29th at 6:00PM.
5 Rivers Taxidermy
30 North Main
Benton, KY
Right behind the Parkers Quicklube.
http://www.crappie.com/crappie/kentucky/239030-lets-discuss-sitdown-knockheads-sonar-session.html (http://www.crappie.com/crappie/kentucky/239030-lets-discuss-sitdown-knockheads-sonar-session.html)
Chuck
-
Thanks guys. If any of you want to come, the get together will be on March 29th at 6:00PM.
5 Rivers Taxidermy
30 North Main
Benton, KY
Right behind the Parkers Quicklube.
[url]http://www.crappie.com/crappie/kentucky/239030-lets-discuss-sitdown-knockheads-sonar-session.html[/url] ([url]http://www.crappie.com/crappie/kentucky/239030-lets-discuss-sitdown-knockheads-sonar-session.html[/url])
Chuck
Correction for chuck....and anyone following this thread...
The SI sonar session in Benton, KY is Saturday March 30 at 6:00pm
(And I will have several different units hooked to monitors with the HB VC 1 video out cable for demonstration purposes ...)
Rickie
-
Must be age, I seem to be getting dummer :(