Humminbird Side Imaging Forums
Side Imaging Forums => 1197c SI, 1198c SI & 1199ci HD SI => Topic started by: scoeri on March 11, 2012, 03:31:13 PM
-
i just installed software update 6.180 in my 1197si. now i can not find the menu to export all nav data as i have done in the past. what am i missing?
thanks,
scott
-
i just installed software update 6.180 in my 1197si. now i can not find the menu to export all nav data as i have done in the past. what am i missing?
thanks,
scott
This functionality is available from the "Nav" menu, under "Waypoints, Routes, Tracks":
Move the cursor up to the "Options" item, press the right arrow buton and from there, you can:
"Select All and..." Export (to MMC/SD card)
Tore
-
Tore is exactly right. HB changed the menue and location that is all. Still works fine from the new location/menu..
Chuck..
-
thank you so much. as usual, with me, it's operator error.
Scott
-
cant blame you when the old spot changes to a new menue.. :P
Chuck
-
How do you import data from one Humminbird to another.(new 998).. I exported the waypoints from the 397 to an sd card. When I put the card in, I couldnt find any place to import them. I thought it was gonna be a plug and play import. No?
-
Turn the unit on first then insert the card.
-
Turn the unit on first then insert the card.
Yep, that was a change with the last software update (well, the one before that on some units...).
-
Thanks wolf and Greg.
I got the data exported from the 597 onto an SD card. Then I fired up the 998 and inserted the card and it gave me a notice that the installation was successfully completed, but when I rebooted the unit, there was no waypoints on my lake.. Any ideas?
Thanks
-
Go into the waypoint management menus and see if you can find any of those waypoints. Make sure that they are not set to hidden or in a group that is hidden.
-
I tried that, and couldnt find any waypoints, or groups. its odd. its not that big of a deal for the guy that owns the unit, because I think he only had 6 waypoints in his 597. lol.. It still bugs me though when stuff like this happens,
-
Rollie,
Unless you loaded the waypoints when the unit was running in the default Simulator mode they should be in there somewhere. ???
-
Greg, The unit was on the boat at the time I loaded it with transducer and gps connected.. The 597 was on temporary power, and wasnt hooked up to transducer or gps though..
i did export my waypoints and trails from my 997 and was able to upload them into the 998, so I think if theres a problem, it may be on the 597s side, but its Ok, because that units going away..
I'm not going to send in the 998. After playing around with it some more,(I think I explained it to you in a PM) I am able to zoom in and out readily now. The zoom in button requires a little bit harder push than it should, but its been getting better with usage..