Humminbird Side Imaging Forums
General => General Discussion => Topic started by: Humminbird_Greg on February 06, 2015, 03:35:16 PM
-
On some of the Humminbird units there are small holes in the front, bottom, top or back of the unit housings. Depending on the model where they will be located. These are for ventilation purposes only and are not in any way a reset button. Poking something in there will rupture the ventilation patch and render your unit non-waterproof!
-
Hehe.
-
Ok ... I've got to wonder who is sticking stuff in the vent holes ...
Rickie
-
Ok ... I've got to wonder who is sticking stuff in the vent holes ...
Rickie
I was wondering the same think Rickie.....must be quite a few if it is necessary to post a warning :)
-
I've heard of more than one doing this so far...
-
I've heard of more than one doing this so far...
Does it let the smoke out ...... or just break the seal?
-
This has got to be the same group of people responsible for the "Do Not Take Orally" warning on the Preparation H ...
Does it let the smoke out ...... or just break the seal?
I've often wondered what the seal looks like in there to be IP7 water rated ...
Rickie
-
This has got to be the same group of people responsible for the "Do Not Take Orally" warning on the Preparation H ...
I've often wondered what the seal looks like in there to be IP7 water rated ...
Rickie
Just poke a micro camera in one of those little holes and look around :) .......NOT
-
This has got to be the same group of people responsible for the "Do Not Take Orally" warning on the Preparation H ...
Rickie
This is mean ... I shouldn't have said that ...
I apologize :)
Rickie
-
LOL!!!
But true! >:D