Topic: Towfish "Made in Sweden"

[Rüdiger]

Hi

Now the work is done. For this towfish i used Roberts idea with some modifies.
The ballast ( 2 kg stainless steel ) on the outside off the towfish works also as a careen and a transducherprotector.
The 36m cable ( 3 extension cable EC W30 ) goes trough the tube and is fixed to the end. I hope, if the fish gets caught in the  tow,  the fixingpoint off the cable  brakes first and so its get be possible to draw the fish backward out.

Material

Tube: PVC 50mm x 2,4mm
Plate: Bubble-PVC „Kömacell“

mvh
Rüdiger

[Rickard]

Hi,
Also, the color is close to the traditional Swedish Grey that was used on all machines from this country some decades ago ;-) It looks like a very accurate design. I look forward to see some images!
Grattis!
Rickard

[Roddy]

Hi,
Nice job!!! Good luck and post some pix.

Hay Robert, I told ya' I would not be the only one. The tubes work well.

[Jolly Roger]

Wow, geiles Gerät Rüdiger!

Lets see some pictures. I'm back to base since a couple of weeks, but the lake is so low and foggy that I didn't had a chance to do anything on the water. I bought a small dinghy with a trailer and a small outboard engine. I will try if it is sufficient for winter scanning since the big boat had to go in winter storage.

Regards from the south / Harry

[sonar2000]

Harry, welcome back and safe..
Post some picture of the new setup on the dinghy.
And as usual some of your great pictures that you get with your setup..

Chuck

[Roddy]

Harry, Hope all is well. How was the sandbox? Welcome back!! Thank You!!  Roddy