Other Humminbird Products > Lakemaster AutoChart
Where to save raw data to be processed?
(1/1)
GM:
After a while reading several posts I am still confused about where to save raw data obtained during acquisition (AutoChart live with Solix, helix, apex, etc). So, I must buy Zero line cards for this or I can simply use regular card disks such as those from ScanDisk. Also, I read that files saved to zero line cards are only in ACU format, while those saved to other cards (eg. ScanDisk) are in SON/DAT format, is it right? Any hint is appreciated.
Best,
GM
rnvinc:
All the AutoChart products must be used with the Zero Line card ...
A regular SD Card is for Nav data, ScreenShots, or recording Sonar ...
A recording on a regular SD Card can be imported into the AutoChart PC program to create custom maps ... but must then be exported to a Zero Line card to be used in the HB unit as a map card ...
Rickie
GM:
Thanks Rickie, I understand that ReefMaster will use SON/DAT/HT raw data for further processing/analyses (and also viewed simultaneously as in here , for example the 2D echogram with the mosaic), which means that the raw data (the one I am interested in) should be saved to SD cards, please correct me if this is wrong.
rnvinc:
--- Quote from: GM on October 05, 2021, 11:40:39 PM ---Thanks Rickie, I understand that ReefMaster will use SON/DAT/HT raw data for further processing/analyses (and also viewed simultaneously as in here , for example the 2D echogram with the mosaic), which means that the raw data (the one I am interested in) should be saved to SD cards, please correct me if this is wrong.
--- End quote ---
You are correct. Sonar recording is written directly to a regular SD Card (32gb max) ...
Rickie
Navigation
[0] Message Index
Go to full version