Humminbird Side Imaging Forums
Side Imaging Forums => 997c SI, 998c SI & 999ci HD SI => Topic started by: fishnnnn on May 23, 2015, 08:04:47 AM
-
998c SI.
If you add a "Thru Hull" transducer, hook up y-cable to SI transducer, does the Thru Hull become the one that ALWAYS shows "Down Imaging, Switch Fire, RTS etc. No matter what boat speed?
-
The AS SIDB Y cable disconnects the 2d channel wire going to the 2d piezo in the XHS 9 HDSI 180 T ...
And re-routes the sonar signal to the "Dual Beam" xducer ...
With the AS SIDB Y cable ...:
*SI/DI and temp will always come from the XHS 9 HDSI 180 T ...
*2d will always come from the Dual Beam xducer ...
The settings in the unit do not change as this is merely re-routing wires ...so the unit will still see this setup as 1 xducer ...
(http://i477.photobucket.com/albums/rr134/rnvinc/HB/null_zpsc446f263.jpg) (http://s477.photobucket.com/user/rnvinc/media/HB/null_zpsc446f263.jpg.html)
Rickie
-
Thanks for info. So nothing I need to change anything in Settings?
-
Thanks for info. So nothing I need to change anything in Settings?
Correct ...
The "Transducer Select" menu choice stays at "Hi Def Sidescan" ...
Rickie