Good day,
I have a 999si with the software 7.46 and the NMEA2k ethernet connecter. I have installed a Raymarine evo100 autopilot and have been having problems with communication. I had a Raymarine tech come out and inspect the system. The different units are detecting each other. There is NO data being transmitted from the 999 to the network. The tech plugged a computer in and no depth, GPS, Waypoints nothing is being transmitted. I saw some videos on different model HB where you go into advanced user settings and enable NMEA2 and set the NMEA output to ON. The only NMEA on my display is for 0183. What am I missing to make these units communicate. Thank you very much. The tech did say HB has great tech support. Thanks again all. Cheers. BB