Author Topic: helix 9 si chirp mega  (Read 8786 times)

0 Members and 1 Guest are viewing this topic.

Offline bobxxx

  • Jr. Member
  • **
  • Joined: Apr 2011
  • Location: Indiana
  • Posts: 82
  • Unit(s): hb798cihd,hb helix9 si di mega,helix7 si
  • Software: 6.61,1.160,1.84
  • Accessories: AS GPS HS
helix 9 si chirp mega
« on: March 23, 2018, 07:06:54 PM »
hi guys,
Ive just purchased a helix 9 mega and have only been out twice.
I was mostly on si and recording.i went threw 2d,si,and di,and when i got to di,I had nothing.I thought
i must have a setting wrong .I went out today intent on using down image and trouble shooting.I came up with nothing .If you crank the sensitivity way up ,you can get a faint image of I don't know what.Is there some setting I could be missing?
Thanks in advance
Bob



Offline Bob B

  • Hero Member
  • *****
  • Joined: Oct 2010
  • Location: Creve Coeur, Il
  • Posts: 1568
  • Unit(s): 1197c si, 1198c si
  • Software: 6.310, 6.490
Re: helix 9 si chirp mega
« Reply #1 on: March 23, 2018, 07:27:31 PM »
Shouldn't have to set the sensitivity that high ..... I would try to reset defaults first in case a setting got messed up, if that doesn't do anything for you.... you may have to give Humminbird customer service a call.
**Looking for the one that makes it all worthwhile**

Offline bobxxx

  • Jr. Member
  • **
  • Joined: Apr 2011
  • Location: Indiana
  • Posts: 82
  • Unit(s): hb798cihd,hb helix9 si di mega,helix7 si
  • Software: 6.61,1.160,1.84
  • Accessories: AS GPS HS
Re: helix 9 si chirp mega
« Reply #2 on: March 23, 2018, 09:51:24 PM »
thanks.that is one setting I  forgot.check it next time out.

Offline bobxxx

  • Jr. Member
  • **
  • Joined: Apr 2011
  • Location: Indiana
  • Posts: 82
  • Unit(s): hb798cihd,hb helix9 si di mega,helix7 si
  • Software: 6.61,1.160,1.84
  • Accessories: AS GPS HS
Re: helix 9 si chirp mega
« Reply #3 on: March 24, 2018, 09:54:56 PM »
I negelated to say that I was using the y cable from the 798 unit
and it must not be compatible with mega unit.I took y cable out and it should be okay next outing.
thanks

Offline rnvinc

  • Hero Member
  • *****
  • Joined: Nov 2009
  • Location: Western KY
  • Posts: 4326
  • Unit(s): 1197c SI Combo, SOLIX G2 MSI
  • Software: Dependent on whim
  • Accessories: AS GRHA, MEGA 360, LowBird LSS 1 & 2
Re: helix 9 si chirp mega
« Reply #4 on: March 25, 2018, 09:38:15 AM »
I negelated to say that I was using the y cable from the 798 unit
and it must not be compatible with mega unit.I took y cable out and it should be okay next outing.
thanks


You are correct that the AS SIDBY Cable used with previous core series units is not compatible with MEGA series  ...

MEGA series requires the 9 M SIDB Y cable  ...
https://www.humminbird.com/Products/9-M-SIDB-Y/

Rickie

Offline bobxxx

  • Jr. Member
  • **
  • Joined: Apr 2011
  • Location: Indiana
  • Posts: 82
  • Unit(s): hb798cihd,hb helix9 si di mega,helix7 si
  • Software: 6.61,1.160,1.84
  • Accessories: AS GPS HS
Re: helix 9 si chirp mega
« Reply #5 on: March 25, 2018, 12:08:50 PM »
By using this new 9 M SIDB Y y-cable,is there any way to select
whether you watch 2 D Cherp or reg 2d duel beam,or to incorporate
the cable switch I already have.
Bob

Offline rnvinc

  • Hero Member
  • *****
  • Joined: Nov 2009
  • Location: Western KY
  • Posts: 4326
  • Unit(s): 1197c SI Combo, SOLIX G2 MSI
  • Software: Dependent on whim
  • Accessories: AS GRHA, MEGA 360, LowBird LSS 1 & 2
Re: helix 9 si chirp mega
« Reply #6 on: March 26, 2018, 09:48:08 PM »
By using this new 9 M SIDB Y y-cable,is there any way to select
whether you watch 2 D Cherp or reg 2d duel beam,or to incorporate
the cable switch I already have.
Bob

CHIRP Configuration settings are under the Setup tab  ...
-----

All of the HB DB Y cables physically disconnect the wire going to the 2d piezo in the SI xducer and connect the wire going to the 2d piezo in the 2d xducer  ...

Any changes to CHIRP settings for the 2d channel will be only affecting the 2d piezo in the 2d xducer  ...

Rickie
« Last Edit: March 26, 2018, 09:51:58 PM by rnvinc »


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
16285 Views
Last post October 04, 2017, 06:33:17 PM
by Stumpy
3 Replies
13986 Views
Last post May 28, 2018, 09:28:20 AM
by rnvinc
3 Replies
10491 Views
Last post July 08, 2018, 07:55:55 PM
by rnvinc
8 Replies
8933 Views
Last post March 14, 2020, 01:34:42 AM
by rnvinc
3 Replies
11569 Views
Last post June 06, 2020, 09:52:35 PM
by rnvinc
5 Replies
4708 Views
Last post August 11, 2020, 11:12:55 PM
by rnvinc
1 Replies
3390 Views
Last post April 14, 2022, 10:09:49 PM
by rnvinc
1 Replies
1121 Views
Last post April 15, 2022, 09:46:26 PM
by rnvinc


SimplePortal 2.3.3 © 2008-2010, SimplePortal