Humminbird Side Imaging Forums

Side Imaging Forums => 987c SI and 981c SI => Topic started by: floridavid on August 31, 2013, 12:56:50 PM

Title: 987c power cycling with new Navionics chip
Post by: floridavid on August 31, 2013, 12:56:50 PM
Hi all.  New member and first post.

Just moved from Florida to Georgia and bought a new Navionics Gold chip for my 987c SI.  Unit was working fine, but when I installed the new chip, MSD/1XG, my unit would turn on for a minute or two then power cycle.  Just did a firmware upgrade, v4.770, and the unit is still power cycling with the new chip.  I can get good cartography images for less than a minute, then it cycles. 

Works fine with the old chip with the new upgrade, except of course no local data.  Any suggestions to fix the issue?

David
Title: Re: 987c power cycling with new Navionics chip
Post by: tilt80 on February 16, 2019, 06:23:43 AM
Mine is doing the same thing. Did you get yours fixed?
Title: Re: 987c power cycling with new Navionics chip
Post by: rnvinc on August 12, 2019, 10:03:54 PM
Not sure how I missed this question back in February  ...

Is your issue still an issue  ...??

Rickie
SimplePortal 2.3.3 © 2008-2010, SimplePortal