Humminbird Side Imaging Forums

Software and Software Development => Other 3rd Party Software => HumViewer => Topic started by: mulliemark on June 27, 2012, 05:42:55 PM

Title: user tracks
Post by: mulliemark on June 27, 2012, 05:42:55 PM

I am sorry if this has been asked before , but I was wondering how to transfer user tracks created in humviewer  to my unit?


thnx
mark

Title: Re: user tracks
Post by: mulliemark on June 27, 2012, 10:27:15 PM

no humviewers out there?

Title: Re: user tracks
Post by: newkid4si on June 28, 2012, 12:24:20 AM

mulliemark
      I don't know the answer, but someone will help you, probably tomorrow.
      It might help if you post which unit you have as the software varies between units.

               mike

Title: Re: user tracks
Post by: mulliemark on June 28, 2012, 07:45:22 AM

I have a 798 

Title: Re: user tracks
Post by: Weekend Warrior on June 28, 2012, 12:44:10 PM

I have an 898 and I JUST figured out how to do this the other day.  I will try to help.  After you've created your user track(mine happened to be 8 points along an underwater hump), you export just the user track to where you want your HBPC files to reside as a .gpx file. Once you have it there(in HBPC), you just upload the user track .gpx file to the drive your SD card is in.  Then, IMPORTANT!, power your unit on first and into normal mode, then insert your card. A dialog box will pop up asking if you want to upload the data from the card into the unit.  Select yes.  Viola!  The user track just shows up as dots on my nav screens, but it's visible and I can follow it if I'm careful driving.  LOL  Hopefully someone who's done this many, many times will chirp in to fill in any gaps I've left.  I'm typing this from memory at work.

Mark

Title: Re: user tracks
Post by: sonar2000 on June 28, 2012, 07:26:42 PM

Mark, if you can write this up as a step by step procedure and put it in the tutorials and articles of this forum for others.
Chuck

Title: Re: user tracks
Post by: mulliemark on June 30, 2012, 07:38:14 PM

thnx ii did get it to work altho those little dots are not the easiest thing to see  with these old eyes ;)






mark

Title: Re: user tracks
Post by: Northwoods on August 11, 2012, 05:20:39 PM

Thanks Mark! You helped me remember how to make this work.

I also figured out how to change the small dots to thin or thick lines for us guys with tired eyes. When you get the tracks on your unit. Go into the menu to edit the tracks. There you can change the symbol for the lines from dots to thin lines or thick lines. you can even change the color if you want.

Title: Re: user tracks
Post by: Weekend Warrior on August 14, 2012, 09:30:53 AM

@Northwoods - Sweet!  Thank you for the information!  Much better than the dots!!!  At the rate I'm going, I think I'll have this unit mastered in about 10 years.  lol

Title: Re: user tracks
Post by: Northwoods on August 14, 2012, 04:45:50 PM

I know what you meen. It seems that every month or so I'm trying figure out something new. Great unit though! It does everything I want it to once I figure it out.