Humminbird Side Imaging Forums
General => General Discussion => Topic started by: Tooofunky86 on May 30, 2012, 09:42:13 AM
-
Hey everyone, needing some help pin-pointing the right spot. I recently bought a 2005 285 pro xl stratos. Upgrading the electronics and not exactly sure where on the transom to mount the transducer. If anyone has any suggestions, would be greatly appreciated!
-
I would also suggest you check the media gallery here and look at what others have posted..
Chuck
-
Tooofunky86
I just installed a transducer on my Stratos 201XL Evolution, click on the attachment, the transducer does not work for high speed at about 30 plus it disappears, I use a thru hull transducer on a HB 728 for high speed runs.
I use the 1198 mostly for map program and at low speed for the SI and down imaging. It works very well at 5 mph and no electrical interference.
Doug Vahrenberg has a video of installing a transducer on a jack plate, I chose to go to the transom.
http://www.dougvahrenberg.com/Videos.html (http://www.dougvahrenberg.com/Videos.html)
-
Here are some photos,now this is where humminbird says to mount it, I also do not have a jackplate. I havent gotten around to test it yet so im hopping someone with a stratos or better idea can tell me if its right or wrong.
-
Sorry dont know how to change the picture upright.[attachurl=2]
-
LAST FEW