Humminbird Side Imaging Forums

General => General Discussion => Topic started by: bassrat on June 26, 2010, 11:19:51 PM

Title: Shoot thru hull transducer location on Skeeter 20I
Post by: bassrat on June 26, 2010, 11:19:51 PM

The installation instructions for the high speed transducer states that you should put the boat in the water and go thru a series of tests to determine the best location for the transducer.  I know that the bilge area is the best place for it. On my boat, and I would guess on many similar bass boats, the bilge area is very small. Is is OK to just mount it this area?  :)

Title: Re: Shoot thru hull transducer location on Skeeter 20I
Post by: RGecy on June 27, 2010, 12:04:16 AM

Yes, the bilge is where you would want to mount it.  At high speeds thats pretty much the only part of the hull still touching the water! ;D

Please post some installation pictures of your boat in the Image Gallery (http://forums.sideimagingsoft.com/index.php?action=media) when you get a chance.

Good Luck,

Robert