Humminbird Side Imaging Forums

Side Imaging Forums => 1197c SI, 1198c SI & 1199ci HD SI => Topic started by: docsonnys on August 16, 2014, 05:27:43 PM

Title: linking 798c si to 1198 or 1199
Post by: docsonnys on August 16, 2014, 05:27:43 PM
I have a 798 c si unit and will purchase a 1198 or 1199 unit soon.  Can I link there two to share waypoints and maps.  I have an interlink unit.
Title: Re: linking 798c si to 1198 or 1199
Post by: Trout Bum on August 17, 2014, 08:33:14 AM
It would be best to use Ethernet.

The 798 and 1199 would need the optional plug in adapter to change the Ethernet round plug to the correct plug for the unit.

The 1198 would be a direct plug in and you would only need an adapter for the 798.
Title: Re: linking 798c si to 1198 or 1199
Post by: docsonnys on August 17, 2014, 12:27:46 PM
Thanks Trout Bum.
Title: Re: linking 798c si to 1198 or 1199
Post by: rnvinc on August 17, 2014, 02:56:14 PM
If the unit is the 798 HD model ...it is Ethernet compatible...

If the 798 does not have HD in the model name...it is only Interlink compatible...
 
Interlink will copy and transfer waypoint data from unit to unit...

Ethernet will only "share" waypoint data...with both units powered on and set to "Share Waypoint"...

Neither Interlink nor Ethernet will share maps...except Ethernet ONIX to ONIX and ION to ION ...

Rickie
Title: Re: linking 798c si to 1198 or 1199
Post by: Trout Bum on August 17, 2014, 06:50:19 PM
I don't believe that Interlink works with the 1199, but not sure.
Title: Re: linking 798c si to 1198 or 1199
Post by: sfw1960 on August 17, 2014, 07:26:16 PM
I don't believe that Interlink works with the 1199, but not sure.

It DOES NOT.
Title: Re: linking 798c si to 1198 or 1199
Post by: Humminbird_Greg on August 18, 2014, 01:19:01 PM
Depending on the software version in the 1198 unit it may or may not communicate with the 798 unit through the InterLink.  They both need to be running the same level (number before the decimal point) software.
SimplePortal 2.3.3 © 2008-2010, SimplePortal