Humminbird Side Imaging Forums

Side Imaging Forums => Helix Series Units => Topic started by: D Johnson on May 01, 2018, 01:54:26 PM

Title: 360 transducer
Post by: D Johnson on May 01, 2018, 01:54:26 PM

Will a Humminbird AS-360-TM 360 work with my Humminbird Helix 10 Chirp Mega SI/GPS G2N Combo.  I have a home made mount that uses a trolling motor shaft in the bow that has a 2D transducer on it and would like to mount a 360 on the same shaft and network it with my 3 Helix units on my boat.  i really don't want the powered pole mount on the stern as I fish the bow most of the time and would loose 23' of the forward view.

Title: Re: 360 transducer
Post by: rnvinc on May 01, 2018, 10:10:56 PM

360 Bow will work with you HELIX MEGA  ...

You most likely already have AS ETH 5XPG with 3 HB units  ...

360 will also connect to the AS ETH 5XPG (with a AS EC QDE adapter cable)  ...

The stock clamp attachment is removable to leave only the 360 pod, composite Shaft, Ethernet cable and power cable  ...

Rickie

Title: Re: 360 transducer
Post by: D Johnson on May 01, 2018, 10:49:59 PM

Thanks Richie.   Yes I have one port left on my hub.  Don