Prior to installing the 360 transducer and heading sensor,
my GPS puck would communicate location data to my vhf marine radio,
the nmea 0183 location using 4800 baud rate that the radio requires.
There are no optional baud rates.
Since installing the 360 and GPS with heading sensor,
the 1198 now sets the baud rate to 38,400 for everything when nmea is set on
which my vhf marine radio needs to receive the location data.
Question, is there a way to get the location data from the 1198 or heading sensor pigtail
by using a different connection point on the 1198 to get 4800 baud rate.
I have most wires available to try patching something together.